Technical Data Sheet 3V GNSS ACTIVE ANTENNA LINEAR POLARIZATION - SMA MOUNT PAGE 1/3 ISSUE 18-03-20B SERIES PART NUMBER R380300036 ANTENNA All dimensions are in mm. Tolerances according ISO 2768 m-H pn ao This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary. Technical Data Sheet 3V GNSS ACTIVE ANTENNA LINEAR POLARIZATION - SMA MOUNT PAGE 2/3 ISSUE 18-03-20B SERIES PART NUMBER R380300036 ANTENNA ELECTRICAL CHARACTERISTICS Frequency Ranges : GALILEO E1 - GPS L1 (1559-1591) MHz GLONASS (1597-1607) MHz Nominal Impedance : 50 VSWR : 2.5:1 Typ. Typical overall gain : 10 dBic Radiation pattern: Dipolar Polarization : Linear vertical Output P1 dB 8 dBm 0.55 Noise Figure (LNA alone) dB Supply Voltage 3 V typ. 2.0 V min 3.5 V max Supply Current 3.8 mA typ Connector type : Male SMA MECHANICAL CHARACTERISTICS ENVIRONMENTAL CHARACTERISTICS Antenna color : BLACK Operating -40/+71 C temperature : IAW MIL-STD-810G Radome material : Ultem 1000 Meth. 501.5 & 502.5, Proc. II Charmille 27-30 -40/+85 Radome texture : Storage C temperature : IAW MIL-STD-810G Meth. 501.5 & 502.5, Proc. I Overall length : 44.5 mm Thermal Shocks -51 / + 85C Weight 10 g IAW Mil-Std-810G Meth. 503.5, proc. Ic. Humidity: Induced Hot Humid IAW MIL-STD-810G Meth 507.5, proc II Immersion (mated) 1m for 2 hours IAW MIL-STD-810G meth 512.5, proc I Solar Radiation MIL-STD-810G, Meth 505.5, 1120 W/m Proc. II Salt Fog 96h (4x24h alterning wet & dry) IAW MIL-STD-810G meth 509.5 Transit Drops 26 drops from 1.2m high IAW MIL-STD-810G meth 516.6, proc IV Vibrations Tracked Vehicle IAW MIL-STD-810G Meth.514.6, proc. I Shocks sine, 40g for 9ms IAW MIL-STD-810G Meth. 516.6, proc. I This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.