Z28551002A Radiall

Technical Data Sheet SCREW ON STRAIGHT MALE JACK CRIMP TYPE SLIDE TYPE - CABLE 2.6/50S PAGE 1/2 ISSUE 19-03-15A SERIES SMP-MAX PART NUMBER R222M20710 All dimensions are in mm . pn ao COMPONENTS MATERIALS PLATING (m) Body BRASS BBR Center contact BRASS NPGR Outer contact Insulator PTFE Gasket Others parts BRASS BBR - - - - - - This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary. Technical Data Sheet SCREW ON STRAIGHT MALE JACK CRIMP TYPE SLIDE TYPE - CABLE 2.6/50S PAGE 2/2 ISSUE 19-03-15A SERIES SMP-MAX PART NUMBER R222M20710 PACKAGING Standard Unit Other 100 Contact us Contact us ELECTRICAL CHARACTERISTICS ENVIRONMENTAL Impedance 50 Operating temperature -55/+165 C 0-6 Hermetic seal NA Atm.cm3/s Frequency GHz Panel leakage NA VSWR 1.25* + 0.0000 x F(GHz) Maxi Insertion loss 0.15* F(GHz) dB Maxi RF leakage - ( NA - F(GHz)) dB Maxi Voltage rating 335 Veff Maxi SPECIFICATION Dielectric withstanding voltage 750 Veff mini Insulation resistance 5000 M mini MECHANICAL CHARACTERISTICS CABLE ASSEMBLY Center contact retention Stripping a b c d e f Axial force Mating End NA N mini mm 2 5 8.5 0 6.5 0 Axial force Opposite end NA N mini Torque NA N.cm mini Assembly instruction: Crimp 01 Recommended torque Mating NA N.cm Recommended cable(s) 100 Panel nut N.cm Clamp nut NA N.cm RG 174 A/F clamp nut 0.0000 mm RG 316 KX 22A Mating life 100 Cycles mini Weight 3.1700 g ECO 316 Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the assembly Cable retention - pull off 53 N mini - torque NA N.cm TOOLING Part Number Description Hexagon R282211000 CRIMPING TOOL 3.25 R282235003 CRIMPING DIES M22520/5-03 3.25 R282293000 CRIMPING TOOL M22520/5-01 OTHER CHARACTERISTICS *Coaxial Transmission Line Only *Slide type connector+Bullet+Snap type receptacle Radial working angle: 3min Axial working range: 2mm Because of the BBR plating, the typical values of the outer contact resistance may slightly differ compared to the NPGR plated jacks. This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.