03.12.2018 RAFIX 22 FS+ - Pushbutton FLEXLAB, illuminated, round collar, plastic front ring, latching 1.30.270.911/2208 The RAFIX 22 FS+ FLEXLAB pushbutton allows individual control component labeling. A DIN A4 label sheet with pre-cut labels which fits in all customary office printers is available for this option. After the legend inserts are printed, the labels can be detached from the sheet and inserted into the colored lens using the fine stop tabs. General information Form of lens flat lens Color of front ring silver-grey Form of collar round Dimensions Dimensions of collar 29.8 mm Overall height 9.85 mm Mounting depth PCB 9.2 mm, QC 27 mm Mounting hole 22.3 mm Key grid 30 x 30 mm Mechanical design Mounting ring nut Contact function latching Illuminability yes Torque for nut ring 1.2 Nm Mechanical characteristics Operating travel 4 mm Robustness max. 100 N Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Storage temperature min. -40 C Storage temperature max. +80 C Operating life 1,000,000 momentary / 500,000 latching cycle B10 1,300,000 momentary / 650,000 latching cycle Degree of protection from front side IP65 (DIN EN 60529) Environmental restistance acc. to IEC 60068-2-14, -30, -33 and -78 Salt spray IEC 600 68-2-11 ROHS compliant yes REACH compliant yes Technical data are approximate and intended solely for general orientation in the selection of a product. Subject to modifications and errors. Images and other graphics may only be similar. For more information, refer to www.rafi.de chapter Imprint / Data Protection.03.12.2018 Panel cut-out to IEC 60947-5-1 Technical data are approximate and intended solely for general orientation in the selection of a product. Subject to modifications and errors. Images and other graphics may only be similar. For more information, refer to www.rafi.de chapter Imprint / Data Protection.