THROUGH HOLE CLOCK OSCILLATORS-HCMOS COMPATIBLE SERIES CO6 AND CO12 FEATURES STANDARD 8 AND 14 PIN DIP PACKAGE TOLERANCE AND STABILITY TO 25 PPM EXCELLENT CLOCK FOR 16 AND 32 BIT PROCESSORS LOW COST AVAILABLE IN 3.3 VOLT SPECIFICATIONS SERIES CO6 CO12 PACKAGE 14 PIN DIP 8 PIN DIP FREQUENCY RANGE 500.00 KHz TO 125.00 MHz 500.00 KHz TO 125.00 MHz CO6100 : 100 PPM CO12100 : 100 PPM FREQUENCY STABILITY CO6050 : 50 PPM CO12050 : 50 PPM CO6025 : 25 PPM CO12025 : 25 PPM 0 C TO +70 C STANDARD 0 C TO +70 C STANDARD OPERATING TEMPERATURE RANGE -40 C TO 85 C EXTENDED -40 C TO 85 C EXTENDED STORAGE TEMPERATURE RANGE -55 C TO +125 C -55 C TO +125 C VOLTAGE +5 VDC 0.5 VDC +5 VDC 0.5 VDC 500 KHz TO 19.999 MHz: 20 mA 500 KHz TO 19.999 MHz: 20 mA INPUT 20 MHz TO 34.999 MHz: 30 mA 20 MHz TO 34.999 MHz: 30 mA CURRENT (MAX) 35 MHz TO 69.999 MHz: 40 mA 35 MHz TO 69.999 MHz: 40 mA 70 MHz TO 125 MHz: 60 mA 70 MHz TO 125 MHz: 60 mA 40 TO 60% NORMAL 40 TO 60% NORMAL SYMMETRY 45 TO 55% TIGHT 45 TO 55% TIGHT UNDER 24 MHz : 10 ns MAX UNDER 24 MHz : 10 ns MAX RISE AND FALL TIME 24 MHz TO 70 MHz : 6 ns MAX 24 MHz TO 70 MHz : 6 ns MAX (0.5 - 4.5 VDC) OUTPUT 70 MHz TO 125 MHz : 3 ns MAX 70 MHz TO 125 MHz : 3 ns MAX LOGIC0 LEVEL +0.5 V MAX. (10% VDD) +0.5 V MAX. (10% VDD) LOGIC1 LEVEL +4.5 V MIN (90% VDD) +4.5 V MIN (90% VDD) LOAD 15 pF OR 10 LS TTL STANDARD 15 pF OR 10 LS TTL STANDARD FREQUENCY STABILITY INCLUSIVE OF ROOM TOLERANCE , FREQUENCY STABILITY OVER TEMPERATURE, 10% POWER SUPPLY VARIATION, AGING, SHOCK, AND VIBRATION +3.3 VOLT VERSION IS AVAILABLE. CONSULT RAMI FOR SPECIFICATIONS OUTPUT LOADS ALSO AVAILABLE AT 15 pF, 30 pF AND 50 pF. CONSULT RAMI FOR SPECIFICATIONS ENVIRONMENTAL AND TECHNICAL CONDITIONS OUTPUT WAVEFORMS ENVIRONMENTAL TEMPERATURE CYCLE MIL-STD 883, METHOD 1010, 10 CYCLES -20 C TO 85 C tf tr SHOCK MIL-STD-202, METHOD 213, TEST CONDITION C VCC VIBRATION MIL-STD-202, METHOD 204, TEST CONDITION A1 LEVEL +4.5 VDC RESISTANCE TO MIL-STD-202, METHOD 210, TEST CONDITION B SOLDERING HEAT 1/2 VCC +2.5 VDC HUMIDITY 85% RELATIVE HUMIDITY AT 85 C 250 HOURS0 LEVEL +0.5 VDC MECHANICAL 0 VDC GROSS LEAK TEST MIL-STD-883, METHOD 1014, TEST CONDITION C t FINE LEAK TEST MIL-STD-883, METHOD 1014, TEST CONDITION A T TERMINAL STRENGTH MIL-STD-202, METHOD 211, TEST CONDITION A AND C MARKING INK EPOXY, HEAT CURED. MOISTURE RESISTANCE MIL-STD 202, METHOD 106, OMIT STEP 7B SOLDERABILITY MIL-STD-202, METHOD 208, 95% COVERAGE SOLVENT RESISTANCE MIL-STD-202, METHOD 2002, METHOD 215 PART NUMBERING SYSTEM FREQUENCY EXTENDED FREQUENCY SERIES S YMMETRY OPTIONS STA BIL ITY TEMPERA TURE 100 100 PPM - - - - TR TA PE A ND REEL* CO6 (14 PIN DIP) 050 50 PPM IN MHz EXT T TIGHT SYMMETRY GW GULL WING CO12 (8 PIN DIP) 025 25 PPM 3.3 +3.3 V EXAMPLE: CO6100-10.000-EXT-T, CO12050-32.000-EXT-T-TR * Available for Gull Wing only RAMI TECHNOLOGY 10651 NW 19th St. Miami, Florida 33172 U.S.A. Tel: 305-593-8000 Fax: 305-593-8487 e-mail: sales ramitechnology.com web: www.ramitechnology.com .819 MAX THROUGH HOLE CLOCK OSCILLATORS - HCMOS COMPATIBLE SERIES CO6 AND CO12 TEST CIRCUIT FREQUENCY STANDARD FREQUENCY OSCILLOSCOPE COUNTER A (8) (5) 14 8 + VDD OUT CLOCK POWER V CL OSCILLATOR SUPPLY - N/C GND 17 (4) DIMENSIONS mm mm Scale n one Di mensi on in CO6 PACKAGE (FULL SIZE 14 PIN DIP) Scale none Dimension in CO12 PACKAGE (HALF SIZE 8 PIN DIP) inch inch COLORED DOT MARKING INDICATES MARKING PIN 1 LOCATION AREA AREA PIN 1 LOCATION 0.46 .08 DIA .018 .003 DIA 0.45 .076 DIA .018 .003 DIA 7.62 .13 .300 .005 15.24 .13 .600 .005 PIN 1 PIN 7 PIN 4 PIN 1 PIN 8 PIN 14 12.19 PIN 8 PIN 5 13.21 MAX .480 .520 MAX 20.80 MAX PIN CONNECTION PIN CONNECTION PIN FUNCTION PIN FUNCTION NOTE: PIN 4 IS INTERNAL NOTE: PIN 7 IS INTERNAL 1 N/C 1 N/C TO HEADER TO HEADER 4 GROUND 7 GROUND 5 OUTPUT 8 OUTPUT 8 VCC 14 VCC PACKAGING 14 PIN DIP: 25 PIECES PER ELECTROSTATIC TUBE 8 PIN DIP: 40 PIECES PER ELECTROSTATIC TUBE RAMI TECHNOLOGY 10651 NW 19th St. Miami, Florida 33172 U.S.A. Tel: 305-593-8000 Fax: 305-593-8487 e-mail: sales ramitechnology.com web: www.ramitechnology.com 7.62 .13 .300 .005 .787 .076 .031 .003 13.21 MAX 6.35 MIN .250 MIN 5.08 MAX .200 MAX 5.08 MAX .200 MAX .250 MIN .01 F .520 MAX 13.20 MAX .519 MAX 4.57 .180 0.79 .08 .031 .003 6.35 MIN 7.62 .13 .300 .005