Qualified with 65kV/s @ Vcommon mode =1KV
Features
EN61010 for test, measurement and lab use
EN60601 for medical applications
DC/DC Converter
Reinforced isolation 6.4kVDC or 8kVDC
Unregulated
Optional continuous short circuit protection
Unique reinforced isolation transformer system
Converters
RxxPxx/R
/X2 option for >9mm input/output clearance
Description
1 Watt
The RxxPxxS_D Series of DC/DC Converters are certified to UL/CSA60950-1. This makes them ideal for
SIP7
safety applications where approved or reinforced isolation is required. The reinforced versions are also
EN61010-1 certified for Lab Equipment Safety.
Single and Dual
Output
Selection Guide
Part nom. Input Output Output Efficiency max. Capacitive
(1) (2)
Number Voltage Voltage Current typ. Load
[VDC] [VDC] [mA] [%] [F]
(3,4,5)
RxxP3.3S/R 5, 12, 15, 24 3.3 303 70 - 80 2200
(3,4,5)
RxxP05S/R 5, 12, 15, 24 5 200 75 - 80 1000
(3,4,5)
RxxP09S/R 5, 12, 15, 24 9 111 75 - 82 1000
(3,4,5)
RxxP12S/R 5, 12, 15, 24 12 84 75 - 82 470
(3,4,5)
RxxP15S/R 5, 12, 15, 24 15 66 75 - 83 470
(3,4,5)
RxxP3.3D/R 5, 12, 15, 24 3.3 151 72 - 79 1000
(3,4,5)
RxxP05D/R 5, 12, 15, 24 5 100 75 - 82 470
(3,4,5)
RxxP09D/R 5, 12, 15, 24 9 55 75 - 82 470
(3,4,5)
RxxP12D/R 5, 12, 15, 24 12 41 75 - 82 220
(3,4,5)
RxxP15D/R 5, 12, 15, 24 15 33 75 - 83 220
Notes:
Note1: Efficiency is tested at nominal input and full load at +25C ambient
Note2: Max. Capacitive Load is defined as the capacitive load that will allow start up
in under 1 second without damage to the converter
E314885
Model Numbering
EN/IEC60950-1 certified
EN/IEC60601-1 certified
UL/CSA 60950-1 certified
R__P__ _/P/X2/R
ES/CSA60601-1 certified
(3)
Reinforced Isolation
Input Voltage EN/IEC61010-1 certified
IEC-60601-1 CB report
(4)
Pinout
Output Voltage
(5)
Protection
Single or Dual
Notes:
Note3: add suffix /R6.4 for 6.4kVDC/1second isolation or /R8 for 8kVDC/1second isolation
Note4: add suffix /X2 for single output with alternative pinout
Note5: add suffix /P for continous short circuit protection
Ordering Examples:
R05P3.3S/R8/P = 5V Input, 3.3V Output, Single Output, 8kVDC/1s isolation, Continous Short Circuit Protection
R24P05S/R6.4/P/X2 = 24V Input, 5V Output, Single Output, 6.4kVDC/1s isolation, Continous SCP, Alternative Pinout
R12P05D/R8/X2 = 12V Input, 5V Output, Dual Output, 8kVDC/1s isolation, Alternative Pinout
www.recom-power.com/eval-ref-boards www.recom-power.com/bier
www.recom-power.com REV.: 5/2018 ECO-1Typical Load Line
RxxPxx/R
DC/DC Converter
Series
Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated)
BASIC CHARACTERISTICS
Parameter Condition Min. Typ. Max.
Input Voltage Range 10%
(5)
Minimum Load 0%
Internal Operating Frequency
20kHz 50kHz 85kHz
Output Ripple and Noise
20MHz BW 200mVp-p
Notes:
Note5: Operation below 10% load will not harm the converter, but specifications may not be met
Efficiency vs. Load
PxxP05S/R6.4 and PxxP05S/R8 PxxP05D/R6.4 and PxxP05D/R8
100 100
90 90
80 80
70 70
60 60
50 50
40 40
30 30
20 20
R05P05S
R05P05D
R12P05S
R12P05D
10 10
R24P05S
R24P05D
0 0
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
Output Load [%] Output Load [%]
REGULATIONS
Parameter Condition Value
Output Accuracy 5.0% max.
Line Regulation low line to high line, full load 1.2%/1% of Vin typ.
3.3V, 5V 15% typ.
Load Regulation 10% to 100% load
9V, 12V, 15V 10% typ.
Tolerance Envelope
+10%
+5%
+5%
Vnom
-1.5%
-5%
10 50 100
Load [%]
continued on next page
www.recom-power.com REV.: 5/2018 ECO-2
Efficiency [%]
Output Voltage [%]
Efficiency [%]