R1SX-0505/H-R Recom Power

w a R r A r 1W Power in SMD package Features Pin compatible with R1S series DC/DC Converter -40C to +100C operating temperature full load High 3kVDC/1 second or 1kVDC/1 second isolation Unregulated IEC/EN/UL62368-1 certified, CB Report Converters 5000m operation R1SX Description 1 Watt Low cost, low profile, open-frame 1W SMD isolated DC/DC single output converters. The R1SX is avail- 3 able with 3.3V or 5V inputs and offers a single unregulated 3.3V or 5V output. There is no minimum SMD load requirement and the quiescent consumption is less than 150mW. Standard isolation is 1kVDC/1s and a /H version with 3kVDC/1s is available. The operating temperature is from -40C up to +100C Single Output without derating. The pin-out is industry standard and compatible with the R1S/R1D series, but at half the height. The converters are fully certified to IEC/EN/UL62368 and IEC/EN/UL60950 and are 10/10 RoHS-conform. Class A EMC conformity requires only an input capacitor and a simple low cost LC filter is all that is needed for Class B EMC. Standard packaging is tape and reel. Selection Guide Part nom. Input Output Output Efficiency max. Capacitive (1) (2) Number Voltage Voltage Current typ. Load VDC VDC mA % F R1SX-3.33.3 3.3 3.3 303 74 2200 R1SX-3.305 3.3 5 200 78 2200 R1SX-0505 5 5 200 78 2200 R1SX-1205 12 5 200 79 2200 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient E224736 Note2: Max cap load is tested at nominal input and full resistive load IEC/EN62368-1 certified UL62368-1 certified IEC/EN60950-1 certified Model Numbering C22.2 No. 62368-1-14 certified CB Report R1 SX- / -R EN55032 compliant EN55024 compliant Output Power Packaging (3) Single Isolation Voltage nom. Output Voltage nom. Input Voltage Notes: Note3: Without suffix, standard isolation voltage (1kVDC/1 second), with suffix /H, high isolation voltage (3kVDC/1 second) Ordering Examples: R1SX-3.305-R 3.3Vin 5Vout 1kVDC/1 second isolation tape and reel packaging R1SX-0505/H-R 5Vin 5Vout 3kVDC/1 second isolation tape and reel packaging www.recom-power.com/eval-ref-boards www.recom-power.com REV.: 6/2020 ECO-1 E a Y n t yTypical Load Line Typical Load Line R1SX DC/DC Converter Series Specifications (measured Ta= 25C, nominal input voltage, full load unless otherwise specified) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter capacitor Input Voltage Range 10.0% 40mA Quiescent Current Minimum Load 0% 20kHz 60kHz 100kHz Internal Operating Frequency (4) Output Ripple and Noise 20MHz BW 100mVp-p Notes: Note4: Measurements are made with a 0.1F MLCC across output (low ESR) Efficiency vs. Load SX-3.33-3 DX-xx05 R1SX-3.33.3(/H) R1SX-xx05(/H) 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 3.3Vin 5Vin 10 10 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load % Output Load % REGULATIONS Parameter Condition Value Output Accuracy 5.0% max. Line Regulation low line to high line 1.2% typ. at 1.0% of Vin typ. 3.3Vout 10.0% typ. / 15.0% max. Load Regulation 10% to 100% load 5Vout 7.0% typ. / 15.0% max. Tolerance Envelope R1SX-3.33.3(/H) R1SX-xx05(/H) +15% +15% +10% +7% +5% +5% Vnom Vnom -1% -1% -5% -5% 10 50 100 10 50 100 Output Load % Output Load % www.recom-power.com REV.: 6/2020 ECO-2 Efficiency % Output Voltage % Output Voltage % Efficiency %