1kVDC & 2kVDC Isolation ECONOLINE Features UL94V-0 Package Material DC/DC-Converter RoHS 6/6 Regulated with 3 year Warranty Toroidal Magnetics Converters Optional Continuous Short Circuit Protected Built-In EN55022 Class A Filter The R1Z series DC/DC converter has been designed for isolating or converting DC power rails Description where an SMD format with regulated output is required, although it is no larger than a standard unregulated SMD converter. Selection Guide 1 Watt SMD Part Input Output Output Max Number Voltage Voltage Current Capacitive (1) SMD 2kVDC (VDC) (VDC) (mA) Load Miniature R1Z-xx3.3* (/H) 3.3, 5, 12, 15, 24 3.3 303 2200F R1Z-xx05* (/H) 3.3, 5, 12, 15, 24 5 200 1200F Isolated R1Z-xx09* (/H) 3.3, 5, 12, 15, 24 9 111 680F R1Z-xx12* (/H) 3.3, 5, 12, 15, 24 12 84 680F Single Output R1Z-xx15* (/H) 3.3, 5, 12, 15, 24 15 66 470F xx= Input Voltage (other input and output voltage combinations available on request *add suffix -R for tape & reel packing e.g. R1Z-0505-R *add suffix /P for continuous short circuit protection, e.g. R1Z-0505/P-R Specifications (measured at T = 25C, nominal input voltage, full load and after warm-up) A Input Voltage Range 5% Output Voltage Accuracy 2% RoHS 2011/65/EU Line Voltage Regulation 1% max. E358085 6/6 Load Voltage Regulation 1% max. EN-60950-1 Certified Output Ripple and Noise (at 20MHz BW) 100mVp-p max. EN-60601-1 Certified* Operating Frequency 20kHz min. / 40kHz typ. / 80kHz max. Efficiency at Full Load 50% min. / 60% typ. UL-60950-1 Certified (2) Minimum Load 10% (*/H suffix) No Load Power Consumption 134mW min. / 217mW typ. / 350mW max. Isolation Voltage (tested for 1 second) 1000VDC (rated for 1 minute**) 500VAC / 60Hz R1Z Isolation Voltage H-Suffix (tested for 1 second) 2000VDC H-Suffix (rated for 1 minute**) 1000VAC / 60Hz Isolation Capacitance 70pF typ. Isolation Resistance 10 GW min. Short Circuit Protection 1 Second Derating-Graph P-Suffix Continuous (Ambient Temperature) Operating Temperature Range (natural convection) -40C to +70C (see Graph) Storage Temperature Range -55C to +125C Reflow Temperature ROHS compliant 245C (30 sec) max. Vapour Phase Process 230C (90 sec) max. (for more details see Application Notes) Relative Humidity 95% RH Package Weight 1.6g Packing Quantity 33 pcs per tube 250 pcs per Reel 3 MTBF R1Z (+25C) using MIL-HDBK 217F 2203 x 10 hours 3 (+70C) using MIL-HDBK 217F 391 x 10 hours . 3 R1Z/P (+25C) using MIL-HDBK 217F 2387 x 10 hours 3 (+70C) using MIL-HDBK 217F 641 x 10 hours For detailed information see Application Notes chapterMTB Conducted / Radiated Emissions EN55022 Level A EN General Safety Report: SPCLVD1211033-3 EN60950-1:2006 + A12:2011 EN Medical Safety Report: MDD1205098-4 + RM1205098-4 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment Refer to Application Notes UL General Safety Report: E358085 UL60950-1, 2nd Edition www.recom-international.com REV: 0/2014 E-119 **Any data referred to in this datasheet are of indicative nature For further details, Application Notes. and based on our practical experience only. please refer to our R1Z/P ECONOLINE DC/DC-Converter Series Typical Characteristics R1Z-3.3xx/P R1Z-05xx/P R1Z-12xx/P 3 + +4 % & 3 + +4 % & 3 + +4 % & * + * + * + R1Z-15xx/P R1Z-3.3xx R1Z-05xx 3 + +4 % & 3 + +4 % & 3 + +4 % & * + * + * + Notes R1Z-12xx R1Z-15xx 3 + +4 % & Note 1: Maximum capacitive load is defined as the 3 + +4 % & capacitive load that will allow start up in under 1second without damage to the converter Note 2: The R1Z series requires a minimum of 10% load on the output to the maintain specified regulation. Operating under no-load conditions will not damage these devices however, they may not meet all listed specifications. * + * + Package Style and Pinning (mm) 10 PIN Single SMD Package Ordering Example: R1Z-0505 (5V Input, 5V Output, not short ( (. circuit protected) R1Z-0505/HP (5V Input, 5V Output, 2kVDC (. /( Isolation and short circuit protection) ( ( ( 5 A ( 1% ( Recommended Footprint Details . * % ( ( ( XX.X 0.5 mm XX.XX 0.25 mm ( ( ( The product information and specifications are subject to change without prior notice. All products are designed for non-safety critical commercial and industrial applications. The Buyer agrees to implement safeguards that anticipate the consequences of any failures that might cause harm, loss of life and/or damage property. E-120 REV: 0/2014 www.recom-power.com Pin Connections Pin Function 1 Vin 2 +Vin 4 -Vout 5 -Vout 7 +Vout 10 NC NC= No Connection R1Z/P 3 + +4 3 + +4 3 + +4 3 + +4 3 + +4 3 + +4 3 + +4 3 + +4