80 to 305VAC input voltage range Features 150% peak power capability AC/DC Converter Wide temperature range: -40C to +90C No load power consumption <150mW Regulated Household and ITE certified Converter 4kVac isolation RAC04-K/277RAC Description 4 Watt The RAC04-K/277 series delivers an uncompromising 4 watts of continuous output power (6W peak) in harsh industrial and household environments. These modules deliver full load output power from -40C to 75C across Single the entire input range of 80VAC to 305VAC and are certified for operation with power derating up to 90C air ambient. A peak load capability of up to 150% supports dynamic power demands of applications. This series of Output fully encapsulated AC/DC modules is a complete solution without the need for external components which supports Ecodesign Lot 6 standby mode operation for worldwide applications in automation, industry 4.0, IoT, household, and home automation. With international safety and EMC certifications for industrial, domestic, ITE, and household applications, these are some of the most versatile power modules on the market. Due to their reinforced class II installation rating for floating outputs and their significantly wide margin to class B emissions compliance without external components and a certified 4kV AC (5.25 kV DC) isolation, these are the easiest to use modular power solutions in the industry. Selection Guide Part Input Output Output Efficiency Max. Capacitive (1) (2) Number Voltage Range Voltage Current typ. Load (VAC VDC mA % F) RAC04-05SK/277 80-305 5 800 76 7200 RAC04-12SK/277 80-305 12 333 78 1000 E224736 RAC04-15SK/277 80-305 15 267 80 820 RAC04-24SK/277 80-305 24 167 80 220 On Request RAC04-3.3SK/277 80-305 3.3 1200 73 10000 IEC60950-1 certified IEC62368-1certified Notes: UL62368-1 certified Note1: Refer to Line Derating graph CSA/CAN C22.2 No. 62368-1-14 certified Note2: Measured 230VAC/50Hz at +25C with constant resistant mode at full load EN62368-1 compliant EN60335-1 compliant EN61010-1 compliant IEC/EN61558-1 compliant IEC/EN61558-2-16 compliant EN55032 compliant EN55024 compliant EN55014-1 /-2 compliant Model Numbering IEC/EN61204-3 compliant FCC 47 Part 15 RAC04- SK/277 CB Report nom. Output Power Single nom. Output Voltage Ordering Examples RAC04-05SK/277 = 5Vout Single RAC04-12SK/277 = 12Vout Single www.recom-power.com REV.: 1/2019 PA-1RAC04-K/277 AC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. nom. Vin= 277VAC 80VAC 305VAC (3) Input Voltage Range 110VDC 390VDC 115VAC 250mA Input Current 230VAC 100mA 115VAC 10A Inrush Current cold start at +25C 230VAC 20A No load Power Consumption 80-305VAC, 50/60Hz 100mW 150mW ErP Standby Mode Conformity 0.5W 0.3W Input Power= (Output Load Capability) 1W 0.65W Input Frequency Range AC input 47Hz 63Hz Start-up Time 20ms Rise Time 10ms 115VAC 20ms Hold-up time 230VAC 80ms Minimum Load 0% 115VAC 0.6 Power Factor 230VAC 0.45 Internal Operating Frequency full load 130kHz (4) 1% of nom. Vout Output Ripple and Noise Notes: Note3: The products were submitted for safety files at AC-Input operation Note4: Measurements are made with a 1.0F MLCC and a 10F MLCC across output Efficiency vs. Load RAC04-05SK/277 RAC04-12SK/277 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 115VAC 115VAC 20 20 230VAC 230VAC 277VAC 10 277VAC 10 0 0 10 20 30 40 50 60 70 80 90 100 0 0 10 20 30 40 50 60 70 80 90 100 Output Load % Output Load % continued on next page www.recom-power.com REV.: 1/2019 PA-2 Efficiency % Efficiency %