Universal AC Input Features Constant Voltage / Constant Current Operation LIGHTLINE CE and UL Certified Class I LED Driver LED DRIVER Active Power Factor Correction AC/DC-Converter IP67 Design for Indoor and Outdoor Use with 5 Year Warranty Cooling by Free Air Convection Selection Guide Part CV Mode CC Mode Efficiency Constant Voltage Current Range DC Voltage Range Constant Current (230VAC) (V) (A) (V) (A) (typ.) RACD150-12 12 0-11 9-12 11 88% 150 Watt RACD150-24 24 0-6.3 14-24 6.3 90% Single RACD150-36 36 0-4.2 26-36 4.2 90% RACD150-48 48 0-3.2 34-48 3.2 90% Output Specifications Input Voltage Range 90-305 VAC or 127-430VDC Input Frequency Range 47-63Hz. Power Factor Full Load, 115VAC >0.98 Full Load, 230VAC >0.95 Full Load, 277VAC >0.94 THD Full Load, 115VAC 8% max. AC Current 115VAC 2A max. RoHS 2011/65/EU 230VAC 1A max. 6/6 Input / Output Isolation 3.75kVAC / 1minute Input / Case Isolation 1.8kVAC / 1minute Output / Case Isolation 0.5kVAC / 1minute E340696 Leakage Current 230VAC <0.5mA UL 8750 Certified Current Tolerance 5% Voltage Tolerance -1% to 5% EN 61347 Certified Start-up Time 115VAC 1.0s ( Full Load) 230VAC / 277VAC 0.8s Ripple & Noise 48V Version 200mV max. RACD150 others 150mV max. (with 20MHz bandwidth & 47F Elco + 0.1F MLCC) Over Current Protection 95%-105% rated current Auto-Recovery Short Circuit Protection Hiccup Mode Over Voltage Protection 12V 12.5V typ. Latch Mode 24V 24.5V typ. (Power off to recover) 36V 36.5V typ. 48V 48.5V typ. Over Temperature Protection Tcase 95C 10C Operating Temperature Range without derating -30C to +50C (see graph) (free air convection, according to CE/UL) Case Temperature 90C max. Note: Operation Humidity 20%-90% RH Non-Condensing The use of a circuit breaker with Storage Temperature -40C to +80C C-characteristic is recommended. Storage Humidity 10%-90% RH Vibration 10-500Hz, 2G, 60 Min. along X, Y and Z All LED Drivers may not be used without IP Rating IP67 Safety Standards UL/cUL LED Lighting Safety (E340696) cUL8750 a load. They must be switched on the CE LVD Directive, Safety EN61347-2-13 primary side only. Noncompliance may CB Report: 12CA61289-1 IEC61347-2-13 damage the LED or reduce its lifetime. EMC Standards EMC Compatibility EN55015 FCC, Part 15 Harmonic Current EN61000-3-2 Class C (75% load) EN61000-3-3 EMC Immunity EN61000-4-2, 3, 4, 5, 6, 11 Dimension 222*68*39mm Weight 1080g MTBF using MIL-HDBK-217F (25C) 200 x 10 hours Refer to Application Notes Design Lifetime 70 x 10 hours L-64 REV: 0/2015 www.recom-power.comRACD150 RACD150 LIGHTLINE AC/DC-Converter Series Derating Curves B + A A * 2 . A . A / A +2 - A - A , A , A A A 0* 0 * + / , 3 * . * ++ 8 2 2) ,/0-* ) Typical Characteristics Constant Voltage / Constant Current Curve J %+2 &% 2 &% 2 % , - . A Maximum Number of LED drivers per circuit breakers Condition Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A 115VAC, 1Ohm C 5 8 9 12 90 phase angle B 4 7 8 9 230VAC, 1Ohm 90 phase angle C 5 13 16 19 B 5 8 9 11 277VAC, 1Ohm 90 phase angle C 9 15 18 21 Package Style and Pinning % %, 33% /% .%3 -.% * *,% * C ,) 12 7 33%- ( *,% .%3 02 4 (> ) 6 4 5 ) 69 4 )7 6 6= 5 *+C+ *+C+ C* C* *3% The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOMs explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 L-65 2 A