1:1 Input Range Features ECONOLINE Efficiency up to 69% DC/DC-Converter 1kVDC and 2kVDC Isolation Option Regulated 1W SMD Package Converters -40C to +85C Operating Temperature Range Continuous Short Circuit Protection Selection Guide Part Input Output Output Capacitive Number Voltage Voltage Current Efficiency Load 1 Watt SMD SMD (VDC) (VDC) (mA) (typ.) (max.) RAZ-0505S* 5 5 200 67% 2200F Single Output RAZ-1205S* 12 5 200 68% 2200F RAZ-2405S* 24 5 200 69% 2200F * add Suffix /H for 2kVDC/1min. Isolation - e.g. RAZ-0505S/H * add Suffix -R for tape & reel packing - e.g. RAZ-1205S-R, RAZ-2405S/H-R Specifications (measured at T = 25C, nominal input voltage and rated output current unless otherwise specified) A RoHS 2011/65/EU Input Voltage Range 10% max. 6/6 Output Voltage Accuracy -1% typ., 5% max. Line Voltage Regulation (low line to high line at max. load) 1% max. Load Voltage Regulation (10% to 100% full load) 1% max. EN-60950-1 Certified Output Ripple and Noise (20MHz BW) 50mVp-p typ., 75mVp-p max. EN-60601-1 Certified* Operating Frequency (Vin=nominal input) 20kHz min. / 35kHz typ. / 60kHz max. (*/H suffix) Efficiency at Full Load see Selection Guide Minimum Load = 0% Specifications valid for 10% minimum load only Isolation Voltage (tested for 1 second) 1250 VDC RAZ (rated for 1 minute**) 1000 VDC Isolation Voltage H-Suffix (tested for 1 second) 2500 VDC H-Suffix (rated for 1 minute**) 2000 VDC Isolation Capacitance 6pF typ., 10pF max. Derating-Graph Isolation Resistance (Viso=500V) 10G min. Short-Circuit Protection continuous (Ambient Temperature) Operating Temperature Range -40C to +85C Storage Temperature -55C to +125C Relative Humidity 95% RH Package Weight 1.6g MTBF (+25C) using MIL-HDBK 217F 3914 x 10 hours Detailed Information see Application Notes chapterMTB MTBF (+85C) using MIL-HDBK 217F 855 x 10 hours Certifications EN General Safety Report: SPCLVD1112018 EN60950-1, 2nd Edition EN Medical Safety Report: MDD1112018 + RM1112018 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment / **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. Refer to Application Notes E-64 REV: 0/2015 www.recom-power.com RAZ RAZ Series ECONOLINE DC/DC-Converter Typical Characteristics 3 + +4 % & * + Note Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. Pin Connections Pin Function 3 1,2 +Vin 12,15~17,28 NC 13 -Vout Recommended Footprint Details 14 +Vout 27 -Vin NC = No Connection ( ) &* ++ Unit: mm Tolerance: 0.25 mm = > 4 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOMs explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 E-65 Package Style and Pinning 3 + +4