10W DIP24 Package ECONOLINE Features 2KVDC and 3kVDC Isolation Options DC/DC-Converter 2:1 and 4:1 Versions with 3 year Warranty Regulated Continuous Short Circuit Protection (power limiting) Converters Synchronous Rectification on 3.3, 5V outputs Full SMD internal design Through Hole or SMD Pinning Options Remote Control Pin Efficiency to 87% 10 Watt The REC10-xxxxSRW/DRW-series offer single and dual regulated outputs in a DIP24 package DIP24 & SMD Description with 2kV or 3kV isolation options and are suitable for higher power industrial or medical applications. Remote on/off control is standard and SMD pinning is offered with the /SMD option. Single & Dual The converters can deliver 150% rated power for short periods of time to cope with applications with large capacitive loads or high start up currents. Output Selection Guide Part Input Output Output Efficiency Max. Cap. Number Voltage Voltage Current Load (VDC) (VDC) (mA) (%) REC10-xx3.3SRW/H*/A/M 9-18, 18-36, 36-75 3.3 2000 84-85 2200F REC10-xx05SRW/H*/A/M 9-18, 18-36, 36-75 5 2000 86-87 2200F REC10-xx12SRW/H*/A/M 9-18, 18-36, 36-75 12 833 85-86 470F REC10-xx15SRW/H*/A/M 9-18, 18-36, 36-75 15 667 85-86 220F REC10-xx05DRW/H*/A/M 9-18, 18-36, 36-75 5 1000 84 1000F RoHS 2011/65/EU REC10-xx12DRW/H*/A/M 9-18, 18-36, 36-75 12 416 86 220F 6/6 E224736 REC10-xx15DRW/H*/A/M 9-18, 18-36, 36-75 15 333 86 100F EN-60950-1 Certified REC10-xx3.3SRWZ/H*/A/M 9-36, 18-75 3.3 2000 84 2200F EN-60601-1 Certified REC10-xx05SRWZ/H*/A/M 9-36, 18-75 5 2000 86 2200F UL-60950-1 Certified REC10-xx12SRWZ/H*/A/M 9-36, 18-75 12 833 85 470F REC10-xx15SRWZ/H*/A/M 9-36, 18-75 15 667 85 220F REC10 REC10-xx05DRWZ/H*/A/M 9-36, 18-75 5 1000 83 1000F REC10-xx12DRWZ/H*/A/M 9-36, 18-75 12 416 85 220F REC10-xx15DRWZ/H*/A/M 9-36, 18-75 15 333 85 100F * Standard is /H2 for 2kVDC isolation, 2:1 4:1 use /H3 for 3kVDC Isolation (not SMD) xx = 9-18Vin = 12, xx = 9-36Vin = 24, * add suffix/X2 for pinning options, see next page. xx = 18-36Vin = 24, xx = 18-75Vin = 48 * add suffix/SM for SMD package, e.g. xx = 36-75Vin = 48 REC10-2405SRW/H2/A/M/SMD Specifications (measured at T = 25C, nominal input voltage, full load and after warm-up) A Input Voltage Range 2:1 & 4:1 Input Filter PI Network Output Voltage Accuracy 1.5% max. Line Voltage Regulation (V to V at full load) 0.5% max. L H Load Voltage Regulation Single 0.5% max. **Any data referred to in this datasheet are of indicative nature and (25% to 100% full load ) Dual 1.2% max. based on our practical experience only. For further details, please refer to our Application Notes. Cross Regulation (100%: 25% to 100% full load ) 5% max. Output Ripple and Noise (with 100n output capacitor and 20MHz BW) 100mVp-p max. Start-up time 300ms typ. Operating Frequency (Full Load) 400kHz typ. Efficiency at Full Load see Selection Guide Minimum Load 0% Refer to Application Notes continued on next page www.recom-power.com REV: 0/2015 E-163 REC10-S DRW(Z)/H*/A/M ECONOLINE DC/DC-Converter Series Specifications (measured at T = 25C, nominal input voltage, full load and after warm-up) A Input Surge Voltage (100ms max.) 12V Input 36VDC Derating-Graph 24V Input 50VDC (Ambient Temperature) 48V Input 100VDC Isolation Voltage H2-Suffix and SMD (tested for 1 second) 2000VDC (rated for 1 minute**) 1000VAC / 60Hz 2:1 Converters H3-Suffix (tested for 1 second) 3000VDC (rated for 1 minute**) 1500VAC / 60Hz Isolation Capacitance 1200pF typ. Isolation Resistance 1 G min. Overload Protection 150% typ. Short Circuit Protection Continuous, Auto Restart Operating Temperature Range 4:1 -40C to +71C (see Graph) (free air convection) 2:1 -40C to +81C (see Graph) Remote On/Off DC/DC ON Open or 3.5V<Vr<12V DC/DC OFF Short or 0V<Vr<1.2V Storage Temperature Range -55C to +105C Temperature Coefficient 0.05% max. 4:1 Converters Relative Humidity 95% RH Case Material Nickel Plated Metal with Non-Conductive Base Thermal Impedance Natural convection 15C/W I Maximum Case Temperature 100C Vibration 10-55Hz, 2G, 30mins along X,Y & Z Package Weight 18g Packing Quantity 15 pcs per Tube 3 MTBF (+25C) using MIL-HDBK 217F 1000 x 10 hours Detailed Information see 3 (+71C) using MIL-HDBK 217F >250 x 10 hours Application Notes chapterMTB . / Certifications EN General Safety Report: SPCLVD1211033-2 EN60950-1:2006 + A12:2011 UL General Safety Report: E224736 UL 60950-1 1st Ed. C22.2 No. 60950-1-03 EN Medical Safety Report: MDD12060585 + RM1206085 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment Typical Characteristics REC10-1205SRW/H2/A/M (/SMD) REC10-1212SRW/H2/A/M (/SMD) 3 + +4 , 7 , * 3 + +4 % & ) * , / . / * + 7 , * , Note: Refer to Application Notes for EMC Class B Filter suggestion E-164 REV: 0/2015 www.recom-power.com REC10 3 + +4 3 + +4