2:1 input voltage range Features Efficiency up to 81% DC/DC Converter EMI Class A without external components Regulated Continuous short circuit protection No minimum load required Converters REC3A Description 3 Watt The REC3A series is cost efficient, general purpose isolated DC/DC converter containing a built in Class DIP24 A EMC filter. The converter is designed to run from industry standard 24V or 5V unregulated supplies and is typically used to provide an isolated, regulated, short circuit protected output. Under Voltage Package Lockout is available as an option. These converters are designed for industrial applications, can drive high capacitive loads and operate over the full -40C to +85C temperature range without derating. Selection Guide Part Input Output Output Efficiency max. Capacitive (1) (2) Number Voltage Range Voltage Current typ. Load VDC VDC mA % F (3) REC3A-0505SW/H2 4.5-9 5 600 76 6800 (3) REC3A-2405SW/H2 18-36 5 600 81 6800 Notes: Note1: Efficiency is test by nominal input and full load at +25C ambient Note2: Max Cap Load is test by nominal input and full resisitive load Model Numbering E224736 REC3A- SW/H2/ (3) UVLO Input Voltage Isolation Output Voltage UL60950 certified Ordering Examples: UL62368 certified REC3A-0505SW/H2: Single Output, 4.5-9Vin (2:1) and 5Vout, 2kVDC Isolation IEC/EN62368-1 certified REC3A-2405SW/H2/X1: Single Output, 18-36Vin (2:1) and 5Vout, 2kVDC Isolation, UVLO Option Notes: Note3: without suffix is without Under Voltage Lockout Option add suffix /X1 for optional Under Voltage Lockout Specifications (measured Ta= 25C, nom. Vin and full load unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Pi Type Internal Input Filter nom. Vin = 5V 4.5VDC 9VDC Input Voltage Range nom. Vin = 24V 18VDC 36VDC Vin = 5V 10VDC Input Surge Voltage Vin = 24V 50VDC Vin = 5V 35mA Quiescent Current Vin = 24V 12mA Start-up Time 10ms Internal Operating Frequency 120kHz Minimum Load 0% measured with 20MHz bandwidth and Output Ripple and Noise 50mVp-p a 0.47F ceramic capacitor DC-DC ON 3.2VDC Vin = 5V DC-DC OFF 3.0VDC (3) Under Voltage Lockout DC-DC ON 16.5VDC Vin = 24V DC-DC OFF 15.6VDC continued on next page www.recom-power.com REV.: 4/2018 ECO-1REC3A DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin and full load unless otherwise stated) Efficiency vs. Load REC3A-0505SW/H2 REC3A-2405SW/H2 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 4.5Vin 20 18Vin 7Vin 24Vin 10 10 9Vin 36Vin 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load % Output Load % REGULATION Parameter Condition Values Output Accuracy 2.0% typ. Line Regulation low line to high line 0.3% max. Load Regulation 10% to 100% load 0.6% max. Deviation vs. Load REC3A-0505SW/H2 REC3A-2405SW/H2 0.45 0.5 0.45 0.4 0.4 0.35 0.35 0.3 0.3 0.25 0.25 0.2 0.2 0.15 0.15 4.5Vin 18Vin 0.1 0.1 7Vin 24Vin 0.05 0.05 9Vin 36Vin 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load % Output Load % PROTECTION Parameter Condition Value Short Circuit Protection (SCP) continuous, automatic recovery Over Load Protection (OLP) 140% min. to 155% typ. (4) Isolation Voltage tested for 1second 2kVDC Isolation Capacitance 2200pF max. Isolation Resistance 1G min. Insulation Grade functional Notes: Note4: For repeat Hi-Pot testing, reduce the time and/or the test voltage www.recom-power.com REV.: 4/2018 ECO-2 Deviation % Efficiency % Deviation % Efficiency %