7.5W DIP24 Package ECONOLINE Features 1KVDC, 2KVDC and 3kVDC Isolation Options DC/DC-Converter Approved for Medical Applications (/H) with 3 year Warranty UL and EN Safety Approvals Regulated Continuous Short Circuit Protection Converters (power limiting) 5 Side Shielded Metal Case Full SMD design 2 Case Style Options 7.5 Watt Remote Pin Option Efficiency to 86 % DIP24 & SMD The REC7.5-xxxxSRW/DRW-series offer single and dual regulated outputs in a DIP24 package Description Single & Dual with 1kV, 2kV or 3kV options and are suitable for higher power industrial or medical applications. Remote on/off control is possible with the /CTRL option and SMD pinning is Output offered with the /SMD option. The converters can deliver 140% rated power for short periods of time to cope with applications with large capacitive loads or high start up currents. Selection Guide Part Input Output Output Efficiency Max Number Voltage Voltage Current Capacitive (1) (VDC) (VDC) (mA) (%) Load REC7.5-xx3.3SRW/H*/A/M 9-18, 18-36, 36-72 3.3 1800 78 6800F REC7.5-xx05SRW/H*/A/M 9-18, 18-36, 36-72 5 1500 79-82 6800F REC7.5-xx09SRW/H*/A/M 9-18, 18-36, 36-72 9 833 81-84 6800F RoHS REC7.5-xx12SRW/H*/A/M 9-18, 18-36, 36-72 12 625 82-85 6800F 2011/65/EU 6/6 E-358085 REC7.5-xx15SRW/H*/A/M 9-18, 18-36, 36-72 15 500 83-86 6800F REC7.5-xx05DRW/H*/A/M 9-18, 18-36, 36-72 5 750 79-82 2200F EN-60950-1 Certified EN-60601-1 Certified REC7.5-xx09DRW/H*/A/M 9-18, 18-36, 36-72 9 417 81-84 2200F UL-60950-1 Certified REC7.5-xx12DRW/H*/A/M 9-18, 18-36, 36-72 12 312 82-85 2200F REC7.5-xx15DRW/H*/A/M 9-18, 18-36, 36-72 15 250 83-86 2200F REC 7.5 2:1 * add suffix /H1 for 1kVDC Isolation, /H2 for 2kVDC isolation or /H3 xx = 9-18Vin = 12, for 3kVDC Isolation (not available in H3/A/M/SMD combination) xx = 18-36Vin = 24, * add suffix /SMD for SMD package, e.g. REC7.5-2405DRW/H1/A/M/SMD xx = 36-72Vin = 48 * add suffix /CTRL for Remote Pin option Derating-Graph * add suffix -R for Tape and Reel Packaging (only for SMD type available) (Ambient Temperature) e.g. REC7.5-2405DRW/H1/A/M/SMD/CTRL-R no plastic case is available for REC7.5 Specifications (measured at T = 25C, nominal input voltage, full load and after warm-up) A Single Dual 3 + +4 % & 3 + +4 % & / . **Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes. * + * + Refer to Application Notes www.recom-power.com REV: 0/2015 E-157 3 + +4 3 + +4 REC7.5-S DRW/H*/A/M ECONOLINE DC/DC-Converter Series Specifications (measured at T = 25C, nominal input voltage, full load and after warm-up) A Input Voltage Range 2:1 Output Voltage Accuracy 2% max. Line Voltage Regulation 0.4% max. Load Voltage Regulation (25% to 100% full load ) 0.8% max. (2) Minimum Load 10% Output Ripple and Noise (at 20MHz BW) 3.3V output type 100mVp-p max. 5, 9, 12 and 15V output types 50mVp-p max. Operating Frequency (Full Load) 150kHz min. / 240kHz max. Input Filter PI Network Efficiency at Full Load see Selection Guide No Load Power Consumption 300mW max. Isolation Voltage H1-Suffix (tested for 1 second) 1000VDC (rated for 1 minute**) 500VAC / 60Hz H2-Suffix (tested for 1 second) 2000VDC (rated for 1 minute**) 1000VAC / 60Hz H3-Suffix (tested for 1 second) 3000VDC (rated for 1 minute**) 1500VAC / 60Hz Isolation Capacitance 50pFtyp. Isolation Resistance 1 G min. Short Circuit Protection (Max temp. = 50C during short circuit conditions) Continuous, Auto Restart Operating Temperature Range (free air convection) -40C to +71C (see Graph) Storage Temperature Range -55C to +125C Relative Humidity 95% RH Case Material Nickel Plated Metal with Non-Conductive Base Thermal Impedance Natural convection 12C/W Package Weight 16g Packing Quantity 15 pcs per Tube 3 MTBF (+25C) Detailed Information see using MIL-HDBK 217F 800 x 10 hours Application Notes chapterMTB 3 (+71C) using MIL-HDBK 217F >200 x 10 hours Certifications UL General Safety Report: E358085 UL 60950-1 1st Ed. C22.2 No. 60950-1-03 EN General Safety Report: SPCLVD1212007 EN60950-1:2006 +A12:2011 EN Medical Safety Report: MDD1205098-3 + RM1205098-3 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment Notes Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter. Note 2: The REC 7.5 series requires a minimum of 10% load on the output to maintain specified regulation. Operating under no-load conditions will not damage these devices however, they may not meet all listed specifications. Typical Characteristics Overload Response . & E-158 REV: 0/2015 www.recom-power.com REC 7.5 , *