RKZ-242005D Recom Power

Power sharing Features High isolation 3kVDC & 4kVDC for 1 second Efficiency up to 87% DC/DC Converter Wide operating temperature range from Unregulated -40C to +85C UL60950 certified Converters RKZ-xx2005D IEC/EN60950-1 certified Description 2 Watt The RKZ-xx2005D series features DC/DC converters which are especially designed for SiC mosfet SIP7 for drivers. The modules are available with input voltages of 5, 12, 15, or 24VDC with two asymmetric outputs of +20VDC and -5VDC. A special feature of this converter is output power SIC Application sharing: the RKZ-xx2005D can be used with equal power (asymmetrical current) or equal current (asymmetrical power) loads. The modules offer 3kVDC or 4kVDC isolation. The operating temperature range of -40C to +100C (with derating) meets harsh environmental requirements. Selection Guide Part nom. Input Output Output Efficiency typ. max. Capacitive (1) Number Voltage Voltage Current typ. Load (VDC) (VDC) (mA) (%) (F) 50/-200 86 RKZ-052005D 5 20/-5 100/1500 +/-80 85 50/-200 RKZ-122005D 12 20/-5 86 100/1500 +/-80 50/-200 RKZ-152005D 15 20/-5 86 100/1500 +/-80 E358085 50/-200 RKZ-242005D 24 20/-5 87 100/1500 +/-80 Notes: Note1: Max. capacitive load is tested at nominal input voltage and full load UL60950-1 certified CSA C22.2 No. 60950-1-07 certified Model Numbering IEC/EN60950-1 certified EN55032 compliant RKZ- 2005D/ (3) Input Voltage Protection (2) Output Voltage Isolation Dual Output Notes: Note2: without suffix, standard 3kVDC isolation add suffix /H for higher 4kVDC isolation Note3: without suffix, without Short Circuit Proetction add suffix /P for continuous short circuit protection Examples: RKZ-052005D = 5Vin, 20/-5Vout, without SCP function + standard 3kVDC isolation RKZ-12005D/HP = 12Vin, 20/-5Vout, with continuous SCP function + high 4kVDC isolation Specifications (measured Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range 10% 20kHz Internal Operating Frequency Minimum Load 0% (4) Output Ripple and Noise 70mVp-p 150mVp-p www.recom-power.com/eval-ref-boards Notes: Note4: Ripple and Noise is measured with a 20MHz bandwidth and a 0.1F ceramic capacitor continued on next page www.recom-power.com REV.: 4/2018 ECO-1Typical Load Line Typical Load Line RKZ-xx2005D DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) Efficiency vs. Load 100 90 80 70 60 50 40 30 052005 20 122005 152005 10 242005 0 0 10 20 30 40 50 60 70 80 90 100 Output Load % REGULATIONS Parameter Condition Values Output Accuracy 5.0% max. Line Regulation low line to high line, full load 1.2% of 1.0% Vin typ. Load Regulation 10% to 100% load 5.0% typ. / 10% max. Tolerance Envelope 5Vout 20Vout +10% +10% +5% +5% +5% +4% Vnom Vnom -0.5% -1% -5% -5% 10 50 100 10 50 100 Load % Load % PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) only with /P suffix continuous, automatic recovery without suffix 3kVDC / 1 second (5) Isolation Voltage I/P to O/P tested for 1 second with suffix /H 4kVDC / 1 second Isolation Capacitance 135pF max. Isolation Resistance 10G min. Notes: Note5: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note6: An input fuse is required if the mains supply is not over-current protected. Recommended fuse: T2A slow blow type www.recom-power.com REV.: 4/2018 ECO-2 Output Voltage Efficiency % Output Voltage