RP08-4805SAW RECOM POWER

4:1 wide input voltage range Features 1.6kVDC isolation DC/DC Converter UL/IEC/EN60950-1, EN50155 certified Efficiency up to 88% Regulated Protected outputs Converter High input voltage range (110VDC) RP08-AW Description 8 Watt The RP08-AW series wide range input DC/DC converters are certified to UL60950-1 and cUL 60950-1. DIP24/SMD This makes them ideal for all telecom and industrial applications where approved safety standards are required. The 24V and 110VDC input versions have been especially designed for railway applications. The DIP24 package is available in both pinned and SMD case styles and meets military standards for Single and Dual thermal shock and vibration tolerance. Output Selection Guide (1) (1) Part Number Input Output Output Input Efficiency Max. Capacitive (2) Voltage Range Voltage Current Current typ. Load VDC VDC mA mA % F (3) RP08-243.3SAW 9-36 3.3 2400 388 85 1330 (3) RP08-2405SAW 9-36 5 1600 383 87 1330 (3) RP08-2412SAW 9-36 12 666 387 86 288 (3) RP08-2415SAW 9-36 15 533 387 86 200 (3) RP08-483.3SAW 18-75 3.3 2400 194 85 1330 (3) RP08-4805SAW 18-75 5 1600 192 87 1330 (3) RP08-4812SAW 18-75 12 666 191 87 288 (3) RP08-4815SAW 18-75 15 533 189 88 200 (3) RP08-1103.3SAW 43-160 3.3 2400 86 84 1330 (3) RP08-11005SAW 43-160 5 1600 86 85 1330 (3) RP08-11012SAW 43-160 12 666 84 86 288 (3) RP08-11015SAW 43-160 15 533 85 86 200 (3) RP08-2405DAW 9-36 5 800 397 84 900 (3) RP08-2412DAW 9-36 12 333 387 86 133 (3) RP08-2415DAW 9-36 15 267 388 86 90 (3) RP08-4805DAW 18-75 5 800 198 84 900 E196683 (3) RP08-4812DAW 18-75 12 333 191 87 133 (3) RP08-4815DAW 18-75 15 267 192 87 90 (3) RP08-11005DAW 43-160 5 800 89 82 900 (3) RP08-11012DAW 43-160 12 333 85 85 133 (3) RP08-11015DAW 43-160 15 267 86 85 90 UL60950-1 certified Notes: IEC/EN60950-1 certified Note1: Maximum values at nominal input voltage and full load EN50155 certified Note2: Max. Cap load is tested at minimum Input and constant resistive load EN50121-3-2 compliant EN55032 compliant Model Numbering RP08- AW/ Package (3) nom. Input Voltage nom. Output Voltage Single or Dual Notes: Note3: no suffix for standard DIP24 package add suffix /SMD for SMD package Ordering Examples RP08-AW DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Filter Pi-Type nom. Vin = 24VDC 9VDVC 24VDC 36VDC Input Voltage Range nom. Vin = 48VDC 18VDC 48VDC 75VDC nom. Vin = 110VDC 43VDC 110VDC 160VDC nom. Vin = 24VDC 50VDC Input Surge Voltage 100ms max. nom. Vin = 48VDC 100VDC nom. Vin = 110VDC 170VDC DC-DC ON 9VDC nom. Vin = 24VDC DC-DC OFF 8VDC DC-DC ON 18VDC Under Voltage Lockout (UVLO) nom. Vin = 48VDC DC-DC OFF 16VDC DC-DC ON 43VDC nom. Vin = 110VDC DC-DC OFF 40VDC Input Reflected Ripple Current 20mAp-p Power up 450ms Start-up time ON/OFF CTRL 5ms Operating Frequency Range 270kHz 300kHz 330kHz Minimum Load 0% DC-DC ON Open or 3.0VDC < V < 12VDC CTRL (4) ON/OFF CTRL Positive Logic DC-DC OFF Short or 0VDC < V < 1.2VDC CTRL Input Current of CTRL pin DC-DC ON -0.5mA +0.5mA DC-DC OFF 2.5mA Standby Current nom. Vin = 24VDC, 48VDC 50mVp-p Ripple and Noise 20MHz BW nom. Vin = 110VDC 75mVp-p Notes: Note4: The ON/OFF control pin voltage is referenced to -Vin pin RP08-2405SAW Efficiency vs. Output Current Efficiency vs. Input Voltage 95 95 90 90 85 80 85 75 80 70 65 75 55 9Vin 50 70 24Vin 45 36Vin 40 65 10 20 30 40 50 60 70 80 90 100 9 12 15 18 21 24 27 30 33 36 Output Current % Input Voltage VDC continued on next page www.recom-power.com REV.: 7/2019 PD-2 Efficiency % Efficiency %