Wide 4:1 input voltage range Features 1.6kVDC isolation DC/DC Converter UL60950-1 certified Efficiency up to 84% Regulated Six-sided continuous shield Converter Fixed operating frequency RP10-EW Description 10 Watt The RP10-EW series wide input range DC/DC converters are certified to UL 60950-1 and cUL 60950-1. 2 x 1 This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2 x 1 package meets military standards for thermal shock and Single and Dual vibration tolerance and is available with an optional remote on/off control pin. Output Selection Guide (1) (1) Part Number Input Output Output Input Efficiency Max. Capacitive (2) Voltage Range Voltage Current Current typ. Load VDC VDC mA mA % F (3,4) RP10-243.3SEW 9-36 3.3 2500 441 78 6800 (3,4) RP10-2405SEW 9-36 5 2000 521 80 4700 (3,4) RP10-2412SEW 9-36 12 830 494 84 690 (3,4) RP10-2415SEW 9-36 15 670 517 81 470 (3,4) RP10-483.3SEW 18-75 3.3 2500 226 76 6800 (3,4) RP10-4805SEW 18-75 5 2000 322 81 4700 (3,4) RP10-4812SEW 18-75 12 830 247 84 690 (3,4) RP10-4815SEW 18-75 15 670 249 84 470 (3,4) RP10-2405DEW 9-36 5 1000 508 82 680 (3,4) RP10-2412DEW 9-36 12 416 520 80 330 E196683 (3,4) RP10-2415DEW 9-36 15 333 520 80 110 (3,4) RP10-4805DEW 18-75 5 1000 254 82 680 (3,4) RP10-4812DEW 18-75 12 416 267 78 330 (3,4) RP10-4815DEW 18-75 15 333 257 81 110 Notes: UL60950-1 certified Note1: Maximum values at nominal input voltage and full load EN55032 compliant Note2: Max. Cap load is tested at minimum input and constant resistive load Model Numbering RP10- EW/ - (4) nom. Input Voltage Package (3) nom. Output Voltage CTRL Logic Single or Dual Notes: Note3: no suffix for standard part without CTRL pin add suffix P for CTRL function with positive logic (1=ON, 0=OFF) add suffix N for CTRL function with negative logic (0=ON, 1=OFF) Note4: add suffix -HC for premounted Heat-sink with clips Ordering Examples RP10-2405SEW/P = 24V input, 5V output, single, positive Logic CTRL pin RP10-4805DEW/N-HC = 48V input, 5V output, dual, negative Logic CTRL pin, Heat-sink premounted www.recom-power.com REV.: 5/2019 PD-1RP10-EW DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Filter Pi-Type nom. Vin = 24VDC 9VDC 24VDC 36VDC Input Voltage Range nom. Vin = 48VDC 18VDC 48VDC 75VDC nom. Vin = 24VDC 50VDC Input Surge Voltage 100ms max. nom. Vin = 48VDC 100VDC (5) Input Reflected Ripple Current 30mAp-p (6) Minimum Load 10% Start-up Time Power up 20ms V DC-DC ON Open or 3.5VDC < < 12VDC CTRL Positive Logic V DC-DC OFF Short or 0VDC < < 1.2VDC CTRL (7) ON/OFF CTRL V DC-DC ON Short or 0VDC < < 1.2VDC CTRL Negative Logic V DC-DC OFF Open or 3.5VDC < < 12VDC CTRL DC-DC ON -0.5mA +1.0mA Input Current of CTRL pin Standby Current DC-DC OFF 20mA Internal Operating Frequency 270kHz 300kHz 330kHz Single 50mVp-p Ripple and Noise 20MHz BW Dual 75mVp-p Notes: Note5: Simulated source impedance of 12H. 12H inductor in series with +Vin Note6: The RP10-EW series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not dama ge these devices, however they may not meet all listed specification Note7: If no suffix is specified, pin6 will be absent. If fitted, the ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin RP10-2405SEW Efficiency vs. Input Voltage full load Efficiency vs. Output Current 95 90 90 85 85 80 80 75 70 75 65 60 70 55 9Vin 50 65 24Vin 45 36Vin 60 40 9 12 15 18 21 24 27 30 33 36 10 20 30 40 50 60 70 80 90 100 Input Voltage VDC Output Current % continued on next page www.recom-power.com REV.: 5/2019 PD-2 Efficiency % Efficiency %