RP15-4815DA Recom Power

2:1 input voltage range Features 1.6kVDC isolation DC/DC Converter UL certified Efficiency up to 89% Regulated Six-sided continuous shield Converter No minimum load required RP15-A Description 15 Watt The RP15-A series are ultraminiature power DC/DC converters in a case half the size of industry 1 x 1 standard 15W converters. Despite their small size, the RP15-A converters are fully specified devices with output currents up to 4 Amps, no minimum load, 1600VDC isolation and low ripple/noise figures. Single and Dual The outputs are also fully protected against short circuits, overcurrent and overvoltage. The RP15-A series will find many uses in applications where board space and/or board height is at a premium. Output Selection Guide (1) (1) Part Number Input Output Output Input Efficiency Max. Capacitive (2) Voltage Range Voltage Current Current typ. Load VDC VDC mA mA % F (3,4) RP15-123.3SA 9-18 3.3 4000 1310 84 12000 (3,4) RP15-1205SA 9-18 5 3000 1420 88 6000 (3,4) RP15-1212SA 9-18 12 1300 1512 86 1000 (3,4) RP15-1215SA 9-18 15 1000 1420 88 660 (3,4) RP15-243.3SA 18-36 3.3 4000 640 86 12000 (3,4) RP15-2405SA 18-36 5 3000 710 88 6000 (3,4) RP15-2412SA 18-36 12 1300 747 87 1000 (3,4) RP15-2415SA 18-36 15 1000 710 88 660 (3,4) RP15-483.3SA 36-75 3.3 4000 320 86 12000 (3,4) E196683 RP15-4805SA 36-75 5 3000 355 88 6000 (3,4) RP15-4812SA 36-75 12 1300 369 88 1000 (3,4) RP15-4815SA 36-75 15 1000 355 88 660 (3,4) RP15-1205DA 9-18 5 1500 1471 85 3000 (3,4) RP15-1212DA 9-18 12 625 1437 87 520 (3,4) RP15-1215DA 9-18 15 500 1420 88 330 UL60950-1 certified (3,4) RP15-2405DA 18-36 5 1500 735 85 3000 (3,4) RP15-2412DA 18-36 12 625 710 88 520 (3,4) RP15-2415DA 18-36 15 500 710 88 330 (3,4) RP15-4805DA 36-75 5 1500 368 85 3000 (3,4) RP15-4812DA 36-75 12 625 351 89 520 (3,4) RP15-4815DA 36-75 15 500 355 88 330 Notes: Note1: Maximum values at nominal input voltage and full load Note2: Max. Cap load is tested at minimum Input and constant resistive load Model Numbering RP15- A/ - (4) nom. Input Voltage Package (3) Output Voltage CTRL Logic Single or Dual Notes: Note3: no suffix for standard part without Trim or CTRL pin add suffix P for CTRL function with positive logic (1=ON, 0=OFF) and Trim pin add suffix N for CTRL function with negative logic (0=ON, 1=OFF) and Trim pin Note4: add suffix -HC for premounted Heat-sink with clamps Ordering Examples RP15-2405SA/P = 24V input, 5V output, single, positive Logic CTRL pin RP15-4805DA-HC = 48V input, 5V output, dual, without CTRL pin, Heat-sink premounted www.recom-power.com REV.: 5/2019 PD-1RP15-A DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Filter Pi-Type nom. Vin = 12VDC 9VDC 12VDC 18VDC Input Voltage Range nom. Vin = 24VDC 18VDC 24VDC 36VDC nom. Vin = 48VDC 36VDC 48VDC 75VDC nom. Vin = 12VDC 36VDC Input Surge Voltage 100s max. nom. Vin = 24VDC 50VDC nom. Vin = 48VDC 100VDC DC-DC ON 9VDC nom. Vin = 12VDC DC-DC OFF 8VDC DC-DC ON 18VDC Under Voltage Lockout (UVLO) nom. Vin = 24VDC DC-DC OFF 14.5VDC DC-DC ON 36VDC nom. Vin = 48VDC DC-DC OFF 30.5VDC (5) Input Reflected Ripple Current 30mAp-p Output Voltage Trimming refer to OUTPUT VOLTAGE TRIMMING -10% +10% Minimum Load 0% Power up 30ms Start-up Time ON/OFF CTRL 30ms DC-DC ON Open or 3.0VDC < V < 15VDC CTRL Positive Logic DC-DC OFF Short or 0VDC < V < 1.2VDC CTRL (6) ON/OFF CTRL DC-DC ON Short or 0VDC < V < 1.2VDC CTRL Negative Logic DC-DC OFF Open or 3.0VDC < V < 15VDC CTRL DC-DC ON -0.5mA +1.0mA Input Current of CTRL pin DC-DC OFF 2.5mA Standby Current Internal Operating Frequency 360kHz 400kHz 440kHz 3.3Vout, 5Vout 75mVp-p measured at 20MHz BW, 12Vout, 15Vout 100mVp-p Ripple and Noise with a 1F M/C X7R and 10F T/C 5Vout, 12Vout, 15Vout 100mVp-p Notes: Note5: Simulated source impedance of 12H. 12H inductor in series with +Vin Note6: If no suffix is specified, the control pin will be omitted. If fitted, the ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin RP15-1205SA Efficiency vs. Input Voltage full load Efficiency vs. Output Current 95 90 90 85 85 80 80 75 70 75 65 60 70 55 9Vin 50 65 12Vin 45 18Vin 40 60 10 20 30 40 50 60 70 80 90 100 9 10 11 12 13 14 15 16 17 18 Output Current % Input Voltage VDC continued on next page www.recom-power.com REV.: 5/2019 PD-2 Efficiency % Efficiency %