2:1 input voltage range Features 1.6kVDC isolation DC/DC Converter UL certified Efficiency up to 91% Regulated Six-sided continuous shield Converter No minimum load required RP30-F Description 30 Watt The RP30-F series DC/DC converters are designed to meet to UL 60950-1 and to cUL60950-1. This 2 x 1 makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2 x 1 package meets military standards for thermal shock and Single and Dual vibration tolerance. Output Selection Guide (1) (1) Part Number Input Output Output Input Efficiency Max. Capacitive (2) Voltage Range Voltage Current Current typ. Load VDC VDC mA mA % F (3,4) RP30-123.3SF 9-18 3.3 8000 2588 85 20000 (3,4) RP30-1205SF 9-18 5 6000 2874 87 14400 (3,4) RP30-1212SF 9-18 12 2500 2809 89 3000 (3,4) RP30-1215SF 9-18 15 2000 2809 89 2000 (3,4) RP30-243.3SF 18-36 3.3 8000 1264 87 20000 (3,4) RP30-2405SF 18-36 5 6000 1389 90 14400 (3,4) RP30-2412SF 18-36 12 2500 1374 91 3000 (3,4) RP30-2415SF 18-36 15 2000 1374 91 2000 (3,4) RP30-483.3SF 36-75 3.3 8000 632 87 20000 (3,4) RP30-4805SF 36-75 5 6000 694 90 14400 E196683 (3,4) RP30-4812SF 36-75 12 2500 687 91 3000 (3,4) RP30-4815SF 36-75 15 2000 687 91 2000 (3,4) RP30-1205DF 9-18 5 3000 2874 87 3000 (3,4) RP30-1212DF 9-18 12 1250 2874 87 2000 (3,4) RP30-1215DF 9-18 15 1000 2874 87 1300 (3,4) RP30-2405DF 18-36 5 3000 1389 90 3000 (3,4) UL60950-1 certified RP30-2412DF 18-36 12 1250 1404 89 2000 (3,4) EN55032 compliant RP30-2415DF 18-36 15 1000 1389 90 1300 (3,4) RP30-4805DF 36-75 5 3000 694 90 3000 (3,4) RP30-4812DF 36-75 12 1250 710 88 2000 (3,4) RP30-4815DF 36-75 15 1000 702 89 1300 Notes: Note1: Maximum values at nominal input voltage and full load Note2: Max. Cap load is tested at minimum input and constant resistive load Model Numbering RP30- F/ - (4) nom. Input Voltage Package (3) CTRL Logic Output Voltage Single or Dual Notes: Note3: no suffix for CTRL function with positive logic (1=ON, 0=OFF) add suffix N for CTRL function with negative logic (0=ON, 1=OFF) Note4: add suffix -HC for premounted Heat-sink with clips Ordering Examples RP30-2405SF = 24V input, 5V output, single, positive Logic CTRL pin RP30-4812DF/N-HC = 48V input, 12V output, dual, negative Logic CTRL pin, Heat-sink premounted www.recom-power.com REV.: 3/2019 PD-1RP30-F DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Filter Pi-Type nom. Vin = 12VDC 9VDC 12VDC 18VDC Input Voltage Range nom. Vin = 24VDC 18VDC 24VDC 36VDC nom. Vin = 48VDC 36VDC 48VDC 75VDC nom. Vin = 12VDC 25VDC Input Surge Voltage 100ms max. nom. Vin = 24VDC 50VDC nom. Vin = 48VDC 100VDC DC-DC ON 9VDC nom. Vin = 12VDC DC-DC OFF 8VDC DC-DC ON 18VDC Under Voltage Lockout (UVLO) nom. Vin = 24VDC DC-DC OFF 16VDC DC-DC ON 36VDC nom. Vin = 48VDC DC-DC OFF 32VDC Output Voltage Trimming refer to OUTPUT VOLTAGE TRIMMING -10% +10% (5) Input Reflected Ripple Current 20mAp-p Minimum Load 0% Power up 30ms Start-up Time ON/OFF CTRL 30ms V DC-DC ON Open or 3.0VDC < < 12VDC CTRL Positive Logic V DC-DC OFF Short or 0VDC < < 1.2VDC CTRL (6) ON/OFF CTRL V DC-DC ON Short or 0VDC < < 1.2VDC CTRL Negative Logic V DC-DC OFF Open or 3.0VDC < < 12VDC CTRL DC-DC ON -0.5mA +0.5mA Input Current of CTRL pin DC-DC OFF 3mA Standby Current Internal Operating Frequency 387kHz 430kHz 473kHz measured at 20MHz BW 3.3Vout, 5Vout 100mVp-p Ripple and Noise with a 1F/50V MLCC 12Vout, 15Vout 150mVp-p Notes: Note5: Simulated source impedance of 12H. 12H inductor in series with +Vin Note6: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin RP30-1205SF Efficiency vs. Input Voltage full load Efficiency vs. Output Current 95 95 90 90 85 80 85 75 70 80 65 60 75 55 9Vin 50 70 12Vin 45 18Vin 40 65 10 20 30 40 50 60 70 80 90 100 9 10 11 12 13 14 15 16 17 18 Output Current % Input Voltage VDC continued on next page www.recom-power.com REV.: 3/2019 PD-2 Efficiency % Efficiency %