RP40-240512TG RECOM POWER

2:1 input voltage range Features 1.6kVDC isolation DC/DC Converter UL certified Efficiency up to 90% Regulated Six-sided continuous shield Converter Available as power module (RPM40-G) RP40-G Description 40 Watt The RP40-G series DC/DC converters are certified to UL 60950-1 and to cUL 60950-1. This makes 2 x 2 them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2 x 2 package meets military standards for thermal shock and vibration tolerance. Single, Dual and Selection Guide Triple Output (1) (1) Part Number Input Output Output Input Efficiency Max. Capacitive (2) Voltage Range Voltage Current Current typ. Load VDC VDC mA mA % F (3) RP40-123.3SG 9-18 3.3 8000 2558 86 21000 (3) RP40-1205SG 9-18 5 8000 3876 86 13600 (3) RP40-1212SG 9-18 12 3333 3876 86 2360 (3) RP40-1215SG 9-18 15 2666 3830 87 1510 (3) RP40-243.3SG 18-36 3.3 8000 1264 87 21000 (3) RP40-2405SG 18-36 5 8000 1873 89 13600 (3) RP40-2412SG 18-36 12 3333 1894 88 2360 (3) RP40-2415SG 18-36 15 2666 1872 89 1510 (3) RP40-483.3SG 36-75 3.3 8000 625 88 21000 (3) RP40-4805SG 36-75 5 8000 926 90 13600 (3) RP40-4812SG 36-75 12 3333 936 89 2360 (3) RP40-4815SG 36-75 15 2666 936 89 1510 (3) RP40-1212DG 9-18 12 1800 4235 85 1200 E196683 (3) RP40-1215DG 9-18 15 1400 4118 85 750 (3) RP40-2412DG 18-36 12 1800 2069 87 1200 (3) RP40-2415DG 18-36 15 1400 2011 87 750 (3) RP40-4812DG 36-75 12 1800 1034 87 1200 (3) RP40-4815DG 36-75 15 1400 1006 87 750 UL60950-1 certified (3) RP40-120512TG 9-18 5/12 6000/400 3837 86 6800/330 (3) RP40-120515TG 9-18 5/15 6000/300 3779 86 6800/110 (3) RP40-240512TG 18-36 5/12 6000/400 1897 87 6800/330 (3) RP40-240515TG 18-36 5/15 6000/300 1868 87 6800/110 (3) RP40-480512TG 36-75 5/12 6000/400 938 88 6800/330 (3) RP40-480515TG 36-75 5/15 6000/300 923 88 6800/110 Notes: Note1: Maximum values at nominal input voltage and full load of standard type Note2: Max. Cap load is tested at minimum Input and constant resistive load Model Numbering RP40- G- (3) Package nom. Input Voltage Output Voltage Single, Dual or Triple Notes: Note3: add suffix -HC for premounted Heat-sink with clips Ordering Examples RP40-2405SG = 24V Input, 5V Output, Single RP40-4812DG-HC = 48V Input, 12V Output, Dual, Heat-sink premounted www.recom-power.com REV.: 3/2019 PD-1RP40-G DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Filter LC Type nom. Vin = 12VDC 9VDC 12VDC 18VDC Input Voltage Range nom. Vin = 24VDC 18VDC 24VDC 36VDC nom. Vin = 48VDC 36VDC 48VDC 75VDC nom. Vin = 12VDC 36VDC Input Surge Voltage 100ms max. nom. Vin = 24VDC 50VDC nom. Vin = 48VDC 100VDC DC-DC ON 9VDC nom. Vin = 12VDC DC-DC OFF 8VDC DC-DC ON 17.8VDC Under Voltage Lockout (UVLO) nom. Vin = 24VDC DC-DC OFF 16VDC DC-DC ON 36VDC nom. Vin = 48VDC DC-DC OFF 34VDC (4) Output Voltage Trimming refer to OUTPUT VOLTAGE TRIMMING -10% +10% (5) Input Reflected Ripple Current 40mAp-p Single 0% (6) Minimum Load Dual and Triple 10% Power up 25ms Start-up Time ON/OFF CTRL 25ms V DC-DC ON Open or 3.0VDC < < 12VDC CTRL (7) ON/OFF CTRL Positive Logic V DC-DC OFF Short or 0VDC < < 1.2VDC CTRL DC-DC ON -0.5mA +0.5mA Input Current of CTRL pin DC-DC OFF 2.5mA Standby Current Internal Operating Frequency 270kHz 300kHz 330kHz 3.3Vout, 5Vout 50mVp-p Single 12Vout, 15Vout 75mVp-p measured at 20MHz BW 12Vout 120mVp-p Ripple and Noise Dual with a 0.1F/50V MLCC 15Vout 150mVp-p 5Vout 50mVp-p Triple 12Vout, 15Vout 75mVp-p Notes: Note4: For the single output: Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +Sense should be connected to its corresponding +Vout and likewise the -Sense should be connected to its corresponding -Vout Note5: Simulated source impedance of 12H. 12H inductor in series with +Vin Note6: The dual and triple output required a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification Note7: The pin voltage is referenced to -Vin pin RP40-1205SG Efficiency vs. Output Current Efficiency vs. Input Voltage 90 95 90 85 85 80 80 75 70 75 65 60 70 55 9Vin 50 65 12Vin 45 18Vin 60 40 9 10 11 12 13 14 15 16 17 18 10 20 30 40 50 60 70 80 90 100 Output Current % continued on next page Input Voltage VDC www.recom-power.com REV.: 3/2019 PD-2 Efficiency % Efficiency %