RPP30-4812SW RECOM POWER

Features 115C Maximum Case Temperature POWERLINE+ -40C MinimumTemp. DC/DC-Converter Built-in FCC/EN55022 Class B Filter with 3 year Warranty ICE 4:1 Wide Input Voltage Range Six Sided Shielded Enclosure Technology* Ribbed or Baseplate Case Styles Min. Efficiency 87% 3kVDC Isolation Low Quiescent Current The RPP30-W series 4:1 input range DC/DC converters are ideal for high end industrial 30 Watt Description applications and COTS Military applications where a very wide operating temperature range of -40C to +115C is required. Although the case size is compact, the converter contains a built-in filter EN55022 Class B / FCC Level B without the need for any external 4:1 Single & components. The RPP30-W is available in two case styles: the ribbed case and the base- plate case for high vibration, bulkhead-mounting or for passive cooling applications. They Dual Output are UL-60950-1 certified. Selection Guide 24V and 48V 4:1 Input Types (1) (2) Part Number Input Output Output Input Efficiency Range Voltage Current Current (Min.) VDC VDC mA mA RPP30-243.3SW 9-36 3.3 8400 57/1326 87% RPP30-2405SW 9-36 5 6000 62/1397 89% RPP30-2412SW 9-36 12 2500 27/1420 87% RPP30-2415SW 9-36 15 2000 31/1436 87% RPP30-2424SW 9-36 24 1250 31/1436 87% RoHS 2011/65/EU 6/6 RPP30-483.3SW 18-75 3.3 9000 46/704 87% RPP30-4805SW 18-75 5 6000 38/710 89% UL-60950-1 Certified E224736 RPP30-4812SW 18-75 12 2500 15/727 87% RPP30-4815SW 18-75 15 2000 19/718 87% RPP30-4824SW 18-75 24 1250 19/718 87% RPP30-W RPP30-2412DW 9-36 12 1250 32/1453 87% RPP30-2415DW 9-36 15 1000 30/1436 87% RPP30-2424DW 9-36 24 625 30/1436 87% RPP30-4812DW 18-75 12 1250 18/727 87% * ICE Technology RPP30-4815DW 18-75 15 1000 20/718 87% RPP30-4824DW 18-75 24 625 20/718 87% ICE (Innovation in Converter Excellence) ** add suffix for case options uses state-of-the-art techniques to minimise internal power dissipation and to increase the internal temperature limits to extend the ambient operating SUFFIX INFORMATION temperature range to the maximum. none = Standard Ribbed Case Refer to Application Notes -B = Baseplate Case For other CTRL logic (-1), case style (-F) or low temperature options (-L, -M, -T) please contact RECOM for availability. www.recom-international.com REV: 0/2014 PP-19RPP30-S DW POWERLINE+ DC/DC-Converter Series Specifications (typical at nominal input and 25C unless otherwise noted) Input Voltage Range 24V nominal input 9-36VDC 48V nominal input 18-75VDC Under Voltage Lockout 24V input DC-DC ON (min.) 8.5VDC DC-DC OFF (max.) 8VDC 48V input DC-DC ON (min.) 17.5VDC DC-DC OFF (max.) 17VDC Input Filter Common Mode EMC Filter Input Surge Voltage (100 ms max.) 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple nominal Vin and full load 300mAp-p Start Up Time nominal Vin and constant resistor load 20ms typ., 50ms max. (3) Remote ON/OFF Logic High Open or 3.0V < Vr < 5.5V Logic Low Short or 0V < Vr < 1.2V Remote OFF input current Nominal input 2mA typ. Output Power 30W max. Output Voltage Accuracy Nominal Vin 1.5% Voltage Adjustability Single Output only 5% Minimum Load 0% Line Regulation low line, high line at full load 0.3% Load Regulation 10% to 100% full load 0.5% Cross Regulation (10% <> 100% Load) Dual Outputs only 3% typ./ 5% max. Ripple and Noise (20MHz bandwith limited) 3.3V, 5V 80mVp-p typ. (measured with 1F MLCC capacitor across outputs) All others 27mV-60mVp-p max Temperature Coefficient 0.04%/C max. Transient Response 25% load step change 800s Over Load Protection % of full load at nominal Vin 120% typ. Short Circuit Protection Power Limit, automatic recovery Output Over Voltage Protection (refer to block diagram in Application Notes) Converter shutdown if Vout > Vout nominal +20% Isolation Voltage Rated at 2250VDC/1 minute, Flash tested at 3000VDC/1 second Isolation Resistance 10M min. Isolation Capacitance (refer to block diagram in Application Notes) 3000pF max. Operating Frequency 300kHz 30kHz Operating Temperature Range Ambient, Free Convection -40C to see Calculation (Note 7) Maximum Case Temperature +115C Storage Temperature Range -55C to +125C Over Temperature Protection (refer to block diagram in Application Notes) internal thermistor Thermal Impedance Ribbed Case: Vertical 7.3C/Watt (Natural convection) Ribbed Case: Horizontal 10C/Watt Relative Humidity 5% to 95% RH (6) Case Material Aluminium Potting Material Silicone (UL94-V0) Weight Ribbed Case 39g Baseplate Case 43g continued on next page PP-20 REV: 0/2014 www.recom-power.com RPP30-W