R2000-T Rectron

R1200 RECTRON SEMICONDUCTOR THRU TECHNICAL SPECIFICATION R2000 HIGH VOLTAGE SILICON RECTIFIER VOLTAGE RANGE 1200 to 2000 Volts CURRENT 0.2 to 0.5 Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-41 MECHANICAL DATA * Case: Molded plastic .034 (0.9) * Epoxy: Device has UL flammability classification 94V-O DIA028 (0.7) 1.0 (25.4) * Lead: MIL-STD-202E method 208C guaranteed MIN. * Mounting position: Any * Weight: 0.35 gram .205 (5.2) .166 (4.2) .107 (2.7) DIA080 (2.0) 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At TA = 25 C unless otherwise noted) RATINGS SYMBOL R1200 R1500 R1800 R2000 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 1200 1500 1800 2000 Volts Maximum RMS Volts 840 1050 1260 1400 VRMS Volts Maximum DC Blocking Voltage VDC 1200 1500 1800 2000 Volts Maximum Average Forward Rectified Current IO 500 200 mAmps o at TA = 50 C Peak Forward Surge Current, 8.3 ms single half sine-wave IFSM 30 Amps superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note) CJ 30 pF 0 Operating and Storage Temperature Range TJ, TSTG -55 to + 150 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS SYMBOL R1200 R1500 R1800 R2000 UNITS Maximum Instantaneous Forward Voltage at 0.5A/0.2A DC VF 2.0 3.0 Volts o Maximum DC Reverse Current TA = 25 C 5.0 uAmps o at Rated DC Blocking Voltage TA =100 C IR 50 Maximum Full Load Reverse Current Average, Full Cycle o 30 uAmps .375, (9.5mm) lead length at TL = 75 C NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 2002-12R1200~R1800 R2000 ( ) RATING AND CHARACTERISTIC CURVES R1200 THRU R2000 FIG. 1 - TYPICAL FORWARD CURRENT FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT DERATING CURVE 70 500 Single Phase Half Wave 60Hz Inductive or 60 8.3ms Single Half Sine-Wave 400 Resistive Load (JEDEC Method) 50 300 40 30 200 20 100 10 0 0 0 50 100 150 175 1 10 100 AMBIENT TEMPERATURE, ( ) NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 10 1.0 T = 25 J 0.1 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON AVERAGE FORWARD CURRENT, (mA) INSTANTANEOUS REVERSE CURRENT, (uA) PEAK FORWARD SURGE CURRENT, (A)