Thread Conversion Specialists Locknuts LN-Z Series locknuts provide a method of securing a threaded entry component into a piece of equipment. Threadforms: Metric, NPT, NPSM, ISO Pipe (BSP), PG, ET Materials: Brass, 316 Stainless Steel, Aluminium, Steel, Nylon 6 Plating: Nickel, Zinc, other on application CE Conformity: Please refer to European Directives & CE Marking Part Number: Please refer to Part Numbering System Dimensions of Metric and NPT Versions (Metallic) Hex A/F Hex A/C Thickness Hex A/F Hex A/C Thickness 1 M16 20.0 23.0 3.0 2 NPT 27.0 31.0 3.0 3 M20 24.0 26.7 3.0 4 NPT 30.5 35.0 3.5 M25 30.0 33.5 3.5 1 NPT 37.6 43.4 5.0 1 M32 36.0 39.0 4.0 1 4 NPT 52.0 60.0 5.5 1 M40 46.0 50.0 4.5 1 2 NPT 60.0 69.0 6.0 M50 60.0 69.0 5.5 2 NPT 75.0 86.2 7.0 1 M63 75.0 86.2 7.0 2 2 NPT 80.0 92.0 9.0 M75 90.2 103.7 7.0 3 NPT 106.4 122.3 9.0 1 M80x2.0 90.2 103.7 8.0 3 2 NPT 114.3 131.5 10.0 M85x2.0 106.4 122.3 8.0 4 NPT 127.0 146.1 10.0 M90x2.0 106.4 122.3 8.0 M100x2.0 114.3 131.5 9.0 Dimensions of Metric Versions (Nylon) Hex A/F Hex A/C Thickness M16 19.0 22.0 6.8 M20 23.0 26.8 8.0 M25 28.0 32.1 9.0 M32 36.5 42.2 9.0 M40 45.9 50.9 10.0 M50 60.0 65.1 10.0 M63 74.0 82.0 10.8 For full material specifications and options please refer to Material Specifications.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for redapt manufacturer: Other Similar products are found below : RDU100504 RDU100604 IPWSHRRFM16 P/S.ETAGM16 ADU100429 SW-Z-6-0-00-04 RDU103004 DOME HD PLUGM20 ADU102904 SW-Z-6-0-00-03 IPWSHRRFM20 IPWSHRRFM25