Model 3410 Electronic LCD Hour Meter DescriptionDescription Maintenance Meters are offered with an optional maximum of 3 Redi-Alerts to alert users when service is due. Models are available with optional front panel eld or fac-tory programmable alerts. Not only does the display ash to get attention, but it displays a choice of 7 different .08 2mm maintenance icons. Users can program or specify the service interval and ash duration for each Redi-Alert. Flash duration is the amount of time in hours that the speci c icon ashes before and after the service interval. If a front panel manual reset of the Redi-Alert is required the front panel models with switches must be speci ed. Options Features Totally sealed from moisture and dirt A choice of 6 housings AC or DC voltage input in the same unit A choice of reset modes Tachometer/Hour Meter versions Front panel programmable Compact depth Preset Timer with output Fits in existing panel openings Can be programmed with starting time Always on display Programmable output thresholds 15+ Year Battery Life Preset Hour Meter/time up or down Up to 3 Redi-Alerts/7 icons Speci cations Display: LCD with large 0.28 7mm high gures black on Maximum Withstanding voltage: 30VDC, reference to Common light background Maximum Load current: 0.1Amp Run indicator: Blinking decimal point Environmental: Temperature: (Storage and Operating) -40 to +185F -40 to +85C Reset: Remote, manual and non-reset (remote reset not Humidity: 95% RH per SAE J1378 available on surface mount housing) Vibration: 20g 10 to 80 Hz per SAE J1378 Shock: 44 to 55gs per SAE J1378 Hour Meter Resolution: 0.01 or 0.1 Hour, displayed Dielectric: 1000VAC 50/60 Hz for 1 minute 1 second, internal Compliance: Compliant to the European WEEE and RoHS Directives Accuracy: 0.1% room temperature Sealing: Totally sealed 0.2% over the speci ed temperature range EMC Compliance: EN61326:1997 with A1:1998 and A2:2001 for Records & Displays: 9999999.9 - hours & 1/10s or industrial environments 999999.99 - hours & 1/100s Protection Against: Alternator load dump: 150V EMI (Electromag- Inputs: 10-300VDC and 20-300VAC-50/60Hz <2mA netic Interface): +400V 500Hz inductive VIH 20VAC or 10VDC minimum switching and reverse polarity VIL 3VAC or 3VDC maximum Enclosure: Totally sealed from moisture and dirt, NEMA Power: Self powered - battery life 15+ years 4/4X, 12, & IP66 compliant from the front when properly mounted using the optional gasket. Terminations: Standard 0.250 6.4mm spades (Not applicable to Snap-In Model) 1 meter wire (inductive) Approvals: UL and cUL Recognized ( le ELIY2.E36690), Output: Format: Open-Drain MOSFET with Source connected to CE, SAE, NEMA 4/4X compliant Common (see note 3) Weight: 1oz 28g www.trumeter.com TM3410-2.0.03-16 Model 3410 Electronic LCD Hour Meter Functions Front Panel Switch Functions: Optilnal Front panel switches can be used for reset, display selection and programming. The two front Panel switches are used as follows: SEL: During programming this switch is used to select options. The SEL switch is used during programming to move horizontally in the programming ow chart. RST: This is the reset switch during normal operation. During programming the RST switch is used to enter an option. The RST switch is used during programming to move vertically in the programming ow chart. Available Icons SERVICE OIL AIR FILTER MUFFLER CHANGE OIL FILTER LAMP Dimensions Rectangular Flush Mount 2-Hole Mount .34 8.6 .34 8.6 1.60 40.6 1.75 44.4 .28 7.0 .28 7.0 1.10 27.9 .89 22.6 .50 12.7 .50 12.7 1.10 27.9 .89 22.6 .05 1.3 .05 1.3 1.41 35.8 .05 1.3 .05 1.3 1.41 35.8 .75 19.0 .75 19.0 .25 6.3 .25 6.3 .88 22.3 .88 22.3 1.43 36.3 1.43 36.3 Panel Cutout: 1.45 36.8mm x 0.95 24.1mm Panel Cutout: 1.45 36.8mm x 0.95 24.1mm Maximum Panel Thickness: 0.375 9.5mm Flush Round/SAE Mount .34 8.6 .50 12.7 .28 7.0 .79 20.0 .03 0.7 1.29 32.7 .05 1.3 2.21 56.1 .05 1.3 1.98 50.3 .75 19.0 .25 6.3 .88 22.3 1.43 36.3 Panel Cutout: 1.45 36.8mm x 0.95 24.1mm Maximum Panel Thickness: 0.375 9.5mm www.trumeter.com