708TX Industrial Ethernet Switch N-Tron Networking Series THEINDUSTRIALNETWORKCOMPANY Managed Industrial Ethernet Switch The N-TRON 708TX Industrial Ethernet Switch combines outstanding performance and ease of use. The fully managed switch is ideally suited for connecting Ethernet-enabled industrial and/or security equipment. PRODUCT FEATURES Eight 10/100BaseTX RJ-45 Ports o o -40 C to 85 C Operating temperature ESD and Surge Protection Diodes on all Ports Auto Sensing 10/100BaseTX, Duplex, and MDIX Store-and-Forward Technology Rugged DIN-Rail Enclosure Redundant Power Inputs (10-30 VDC) Con gurable Alarm Contact Con gurable Bi-Color Fault Status LED Fully Managed Features: Full SNMP and Web Browser Management Detailed Ring Map and Fault Location Charting N-Ring Technology with ~30ms Healing Remote Monitoring Options N-View OPC Monitoring For ease of con guration and monitoring, the 708TX offers web Plug-and-Play IGMP Support browser management and N-View OLE for Process Control (OPC) 802.1Q tag VLAN and Port VLAN server software. N-TRON s N-View software can be combined with 802.1p QoS and Port QoS popular HMI software packages to add network traf c monitoring, EtherNet/IP CIP Messaging trending, and alarming to any application using N-TRON switches. LLDP (Link Layer Discovery Protocol) In addition SNMP is available for switch link and status monitoring. Trunking The Alarm Contact and Status LED can be con gured to respond to Mirroring power failure on power input 1 or input 2, N-Ring Broken, Partial Break 802.1d, 802.1w, 802.1D RSTP High, Partial Break Low, or if multiple ring managers are detected. DHCP Server, Option 82 relay, Option 61, IP Fallback N-Ring Technology Port SecurityMAC Address Based The 708TX ring manager, using N-TRON s N-Ring technology, Management Features offers expanded ring size capacity, detailed fault diagnostics, The 708TX offers several management functions that can be easily and a standard healing time of ~30ms. The 708TX ring manager con gured using a web browser. periodically checks the health of the ring via packets. If the ring manager stops receiving these health check packets, it converts the IGMP Snooping - Internet Group Management Protocol is a feature that allows the 708TX switch to forward and filter ring to a linear bus topology within ~30ms. When all switches in multicast traffic intelligently. the ring are N-TRON fully managed switches, a detailed ring map and fault location chart will also be provided on the ring managers VLAN - Virtual Local Area Network allows you to segment the switch web browser and OPC server to identfy the health status of the ring. in order to create two or more separate local area network domains. N-Link allows the linking of two N-Rings. Up to 250 fully managed QoS - Quality of Service provides prioritization of network traf c N-TRON switches can participate in N-Ring topologies. in order to provide better network service. The primary goal of QoS Industrial Packaging and Speci cations is to improve the latency of prioritized Ethernet packets required for ring management, real-time, and other interactive applications. The 708TX is designed to operate in industrial environments. It is housed in a rugged steel DIN-Rail enclosure. It has extended Trunking - Trunking (link aggregation) enables multiple physical industrial speci cations and features to meet or exceed the operating ports to be linked together and function as one uplink to another parameters of the connected equipment. These include extended N-TRON trunking capable switch configured in the same temperature ratings, extended shock and vibrations specs, redundant manner, thereby increasing the bandwidth between switches. This power inputs, and high MTBF (greater than 2M hours). con guration can provide increased bandwidth and redundancy to applications requiring high levels of fault tolerant operation. Ease of Use Port Mirroring - This function allows the traf c on one port to be The 10/100BaseTX ports are auto sensing and auto con guring. duplicated and sent to a designated mirror port. Port mirroring can Each copper port is automatically negotiated for maximum speed be used to monitor Ethernet traf c on the designated source port and performance by default, but can also be hard coded using the using the assigned mirror port. user interface. A high-speed processor allows wire speed capability Rapid Spanning Tree - This function allows the switch to be on all 100BaseTX ports simultaneously. con gured in a ring or mesh topology, and provides support for redundant path communications with high speed (rapid) healing.708TX Specifications THEINDUSTRIALNETWORKCOMPANY 708TX Speci cations Network Media Switch Properties 10BaseT: >Cat3 Cable Number of MAC Addresses: 8000 100BaseTX: >Cat5 Cable Aging Time: Programmable Latency Typical: 2.9 s Connectors Switching Method: Store-and-Forward 10/100BaseTX: Eight (8) RJ-45 Copper Ports Case Dimensions Recommended Wiring Clearance Height: 2.3 (5.8cm) Front: 2 (5.08cm) Width: 6 (15.3cm) Depth: 3.8 (9.6cm) Side: 1 (2.54cm) Weight (max): 1.7 lbs (0.8kg) DIN-Rail Mount: 35mm Electrical Redundant Input Voltage: 10-30 VDC Input Current (max): 250mA max 24VDC N-TRON Power Supply: NTPS-24-1.3 (1.3 A 24V) Regulatory Approvals FCC/CE (CFR 47, Part 15, Subpart B, Class A) Environmental o o EN 55011 Operating Temperature: -40 C to 85 C o o ICES-003- Class A Storage Temperature: -40 C to 85 C Operating Humidity: 5% to 95% EN61000-4-2/3/4/5/6/8/11, EN61000-6-2/4 (Non Condensing) UL /cUL: Class I, Div 2, Groups A, B, C, D and T4A Operating Altitude: 0 to 10,000 ft. ANSI/ISA 12.12.01-2007 ATEX II 3 G Ex nC (DEMKO 03 ATEX 0316686U) Shock and Vibration (bulkhead mounted) ABS Type Approval for Shipboard Applications Shock: 200g 10ms DNV Type Approval Certi cation Vibration/Seismic: 50g, 5-200Hz, Triaxial EN50155 for Railway Applications Reliability GOST-R Certi ed MTBF: >2 Million Hours RoHS Compliant Designed to comply with: IEEE 1613 for Electric Utility Substations NEMA TS1/TS2 for Traf c Control Contact Information N-TRON Corp. N-TRON Asia N-TRON Europe GmbH 820 S. University Blvd., Suite 4E Suite : 2267, 22/F, One Lujiazui Alte Steinhauserstr 19 Mobile, AL 36609 USA 68 Yin Cheng Road Center, 6330 Cham / Zg Switzerland TEL: (251) 342-2164 Pudong New Area TEL: +41 41 7406636 FAX: (251) 342-6353 200120 Shanghai, P.R. China FAX: +41 41 7406637 Website: www.N-TRON.com Phone: +86 (0) 21 6194 6777 Email: N-TRON info N-TRON.com Fax: +86 (0) 21 6194 6699 REV 100624 2010 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identi cation purposes only and may be trademarks and/or registered trademarks of their respective company. Speci cations subject to change without notice. The responsibility for the use and application of N-TRON products rests with the end user. N-TRON makes no warranties as to the tness or suitability of any N-TRON product for any speci c application. N-TRON Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA.