EL5166IWZ-T7A Renesas

DATASHEET EL5166, EL5167 FN7365 Rev 6.00 1.4GHz Current Feedback Amplifiers with Enable September 14, 2010 The EL5166 and EL5167 amplifiers are of the current Features feedback variety and exhibit a very high bandwidth of Gain-of-1 bandwidth = 1.4GHz/gain-of-2 1.4GHz at A = +1 and 800MHz at A = +2. This makes V V bandwidth = 800MHz these amplifiers ideal for today s high speed video and monitor applications, as well as a number of RF and IF 6000V/s slew rate frequency designs. Single and dual supply operation from 5V to 12V With a supply current of just 8.5mA and the ability to run Low noise = 1.7nV/Hz from a single supply voltage from 5V to 12V, these amplifiers 8.5mA supply current offer very high performance for little power consumption. Fast enable/disable (EL5166 only) The EL5166 also incorporates an enable and disable function to reduce the supply current to 13A typical per 600MHz family - (EL5164 and EL5165) amplifier. Allowing the CE pin to float or applying a low logic 400MHz family - (EL5162 and EL5163) level will enable the amplifier. 200MHz family - (EL5160 and EL5161) The EL5167 is offered in the 5 Ld SOT-23 package and the Pb-free available (RoHS compliant) EL5166 is available in the 6 Ld SOT-23 as well as the industry-standard 8 Ld SOIC packages. Both operate over Applications the industrial temperature range of -40C to +85C. Video amplifiers Pinouts EL5166 EL5166 Cable drivers (8 LD SOIC) (6 LD SOT-23) RGB amplifiers TOP VIEW TOP VIEW Test equipment NC 11 88 CE OUT 1 6 VS+ Instrumentation IN- 22 77 VS+ VS- 2 5 CE - + - + Current to voltage converters IN+ 33 66 OUT IN+ 3 4 IN- VS- 44 55 NC EL5167 (5 LD SOT-23, SC-70) TOP VIEW OUT 1 5 VS+ VS- 2 + - IN+ 3 4 IN- FN7365 Rev 6.00 Page 1 of 16 September 14, 2010EL5166, EL5167 Ordering Information PART NUMBER PART PACKAGE PKG. (Note 1) MARKING (Pb-free) DWG. EL5166ISZ 5166ISZ 8 Ld SOIC (150 mil) M8.15E EL5166ISZ-T7* 5166ISZ 8 Ld SOIC (150 mil) M8.15E EL5166ISZ-T13* 5166ISZ 8 Ld SOIC (150 mil) M8.15E EL5166IWZ-T7* BAPA (Note 2) 6 Ld SOT-23 P6.064A EL5166IWZ-T7A* BAPA (Note 2) 6 Ld SOT-23 P6.064A EL5167ICZ-T7* BFA (Note 2) 5 Ld SC-70 (1.25mm) P5.049 EL5167ICZ-T7A* BFA (Note 2) 5 Ld SC-70 (1.25mm) P5.049 EL5167IWZ-T7* BARA (Note 2) 5 Ld SOT-23 P5.064A EL5167IWZ-T7A* BARA (Note 2) 5 Ld SOT-23 P5.064A *Please refer to TB347 for details on reel specifications. NOTES: 1. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 2. The part marking is located on the bottom of the part. FN7365 Rev 6.00 Page 2 of 16 September 14, 2010