DATASHEET EL5174 FN7313 Rev.10.00 550MHz Differential Twisted-Pair Driver Aug 3, 2020 The EL5174 is a single high bandwidth amplifier with an output Features in differential form. It is primarily targeted for applications Fully differential inputs, outputs, and feedback such as driving twisted-pair lines in component video applications. The inputs can be in either single-ended or Differential input range 2.3V differential form but the outputs are always in differential 550MHz 3dB bandwidth form. 1100V/s slew rate On the EL5174, two feedback inputs provide you with the Low distortion at 5MHz ability to set the gain of each device (stable at minimum gain of one). For a fixed gain of two, please see the EL5173 data Single 5V or dual 5V supplies sheet (FN7312). 60mA maximum output current The output common mode level is set by the associated REF Low power - 12.5mA pin, which has a -3dB bandwidth of over 110MHz. Generally, Pb-free (RoHS compliant) this pin is grounded but can be tied to any voltage reference. All outputs are short circuit protected to withstand temporary Applications overload condition. Twisted-pair driver The EL5174 is available in a 8 Ld SOIC package. It is specified for Differential line driver operation across the full -40C to +85C temperature range. VGA over twisted-pair Related Literature ADSL/HDSL driver For a full list of related documents, visit our website: Single-ended to differential amplification Transmission of analog signals in a noisy environment EL5174 product page FN7313 Rev.10.00 Page 1 of 13 Aug 3, 2020EL5174 Ordering Information PART NUMBER PART TEMP. RANGE TAPE AND REEL PACKAGE PKG. (Notes 1, 2, 3) MARKING (C) (UNITS) (RoHS Compliant) DWG. EL5174ISZ 5174ISZ -40 to +85 - 8 Ld SOIC M8.15E EL5174ISZ-T7 5174ISZ -40 to +85 2.5k 8 Ld SOIC M8.15E EL5174ISZ-T13 5174ISZ -40 to +85 1k 8 Ld SOIC M8.15E NOTE: 1. See TB347 for details about reel specifications. 2. These Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 3. For Moisture Sensitivity Level (MSL), see the EL5174 device page. For more information about MSL, see TB363. Pinout (8 LD SOIC) TOP VIEW FBP 1 8 OUT+ IN+ 2 7 VS- + - REF 3 6 VS+ FBN 4 5 OUT- Pin Descriptions PIN NUMBER PIN NAME PIN FUNCTION 1 FBP Feedback from non-inverting output 2 IN+ Non-inverting input 3 REF Inverting inputs, note that on EL5174, this pin is also the REF pin 4 FBN Feedback from inverting output 5 OUT- Inverting output 6 VS+ Positive supply 7 VS- Negative supply 8 OUT+ Non-inverting output FN7313 Rev.10.00 Page 2 of 13 Aug 3, 2020