400MHz Slew Enhanced VFAs EL5202, EL5203 Features The EL5202 and EL5203 are dual, high-speed VFAs based on a Operates off 3V, 5V, or 5V supplies CFA architecture. This gives the typical high slew rate benefits Power-down to 13A (EL5202) of a CFA family along with the stability and ease of use -3dB bandwidth = 400MHz associated with the VFA type architecture. With slew rates of 3500V/s, these devices enable the use of voltage feedback 0.1dB bandwidth = 35MHz amplifiers in a space where the only alternative has been Low supply current = 5mA per amplifier current feedback amplifiers. This family also includes single, Slew rate = 3500V/s dual, and triple versions with 750MHz bandwidths please see the EL5104 through EL5304 data sheet for details. Low offset voltage = 5mV max Both devices operate on single 5V or 5V supplies from Output current = 150mA minimum supply current. The EL5202 also features an output A = 2000 VOL enable function, which can be used to put the output in to a Differential gain/phase = 0.01%/0.01 high-impedance mode. This allows the outputs of multiple amplifiers to be tied together for use in multiplexing Pb-free (RoHS compliant) applications. Applications Typical applications for these families include cable driving, Video amplifiers filtering, A/D and D/A buffering, multiplexing and summing within video, communications, and instrumentation designs. PCMCIA applications A/D drivers Line drivers Portable computers High speed communications RGB applications Broadcast equipment Active filtering January 17, 2014 CAUTION: These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1 1-888-INTERSIL or 1-888-468-3774 Copyright Intersil Americas LLC 2002-2008, 2014. All Rights Reserved FN7331.9 Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners.EL5202, EL5203 Ordering Information PART NUMBER TEMP RANGE PACKAGE PKG (Note 3) PART MARKING (C) (Pb-free) DWG. EL5202IYZ (Note 2) BAAAD -40 to +85 10 Ld MSOP (3.0mm) M10.118A EL5202IYZ-T7 (Notes 1, 2) BAAAD -40 to +85 10 Ld MSOP (3.0mm) M10.118A EL5202IYZ-T13 (Notes 1, 2) BAAAD -40 to +85 10 Ld MSOP (3.0mm) M10.118A EL5203ISZ (Note 2) 5203ISZ -40 to +85 8 Ld SOIC (150 mil) M8.15E EL5203ISZ-T7 (Notes 1, 2) 5203ISZ -40 to +85 8 Ld SOIC (150 mil) M8.15E EL5203ISZ-T13 (Notes 1, 2) 5203ISZ -40 to +85 8 Ld SOIC (150 mil) M8.15E EL5203IYZ (Note 2) BAAAE -40 to +85 8 Ld MSOP (3.0mm) M8.118A EL5203IYZ-T7 (Notes 1, 2) BAAAE -40 to +85 8 Ld MSOP (3.0mm) M8.118A EL5203IYZ-T13 (Notes 1, 2) BAAAE -40 to +85 8 Ld MSOP (3.0mm) M8.118A NOTES: 1. Please refer to TB347 for details on reel specifications. 2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 3. For Moisture Sensitivity Level (MSL), please see product information page for EL5202, EL5203 . For more information on MSL, please see tech brief TB363. Pin Configurations EL5202 EL5203 (10 LD MSOP) (8 LD SOIC, MSOP) TOP VIEW TOP VIEW OUTA 1 8 VS+ OUT 1 10 VS+ INA- 2 - 7 OUTB IN- 2 9 OUT - + + INA+ 3 6 INB- IN+ 3 8 IN- - - + VS- 4 + 5 INB+ VS- 4 77 IN+ CE 5 6 CE FN7331.9 2 January 17, 2014