HIN232ACBZ Renesas

DATASHEET HIN232A FN4316 Rev 1.00 High Speed +5V Powered RS-232 Transmitters/Receivers March 13, 2006 The HIN232A high-speed RS-232 transmitter/receiver Features interface circuit meets all ElA high-speed RS-232E and V.28 Meets All RS-232E and V.28 Specifications specifications, and is particularly suited for those applications where 12V is not available. They require a Requires Only 0.1F or Greater External Capacitors single +5V power supply and feature onboard charge pump High Data Rate 230kbit/s voltage converters which generate +10V and -10V supplies Requires Only Single +5V Power Supply from the 5V supply. Onboard Voltage Doubler/Inverter The drivers feature true TTL/CMOS input compatibility, slew rate-limited output, and 300 power-off source impedance. Low Power Consumption (Typ) . 5mA The receivers can handle up to 30V input, and have a 3k Multiple Drivers to 7k input impedance. The receivers also feature - 10V Output Swing for +5V lnput hysteresis to greatly improve noise rejection. -300 Power-Off Source Impedance Ordering Information - Output Current Limiting - TTL/CMOS Compatible TEMP. PKG. PART RANGE DWG. Multiple Receivers o PART NO. MARKING ( C) PACKAGE - 30V Input Voltage Range HIN232ACB 232ACB 0 to 70 16 Ld SOIC M16.3 -3k to 7k Input Impedance HIN232ACB-T 232ACB 0 to 70 16 Ld SOIC M16.3 - 0.5V Hysteresis to Improve Noise Rejection Tape and Reel Pb-Free Plus Anneal Available (RoHS Compliant) HIN232ACBZ 232ACBZ 0 to 70 16 Ld SOIC M16.3 (See Note) (Pb-free) Applications HIN232ACBZ-T 232ACBZ 0 to 70 16 Ld SOIC M16.3 (See Note) Tape and Reel Any System Requiring High-Speed RS-232 (Pb-free) Communication Ports HIN232ACBN 232ACBN 0 to 70 16 Ld SOIC (N) M16.15 - Computer - Portable, Mainframe, Laptop HIN232ACBN-T 232ACBN 0 to 70 16 Ld SOIC (N) M16.15 - Peripheral - Printers and Terminals Tape and Reel - Instrumentation, UPS HIN232ACBNZ 232ACBNZ 0 to 70 16 Ld SOIC (N) M16.15 - Modems (See Note) (Pb-free) HIN232ACBNZ-T 232ACBNZ 0 to 70 16 Ld SOIC (N) M16.15 (See Note) Tape and Reel (Pb-free) HIN232ACP HIN232ACP 0 to 70 16 Ld PDIP E16.3 HIN232ACPZ 232ACPZ 0 to 70 16 Ld PDIP* E16.3 (See Note) (Pb-free) *Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. Selection Table NUMBER OF NUMBER OF NUMBER OF 0.1 F LOW POWER NUMBER OF PART POWER SUPPLY RS-232 RS-232 EXTERNAL SHUTDOWN/TTL THREE- RECEIVERS ACTIVE NUMBER VOLTAGE DRIVERS RECEIVERS CAPACITORS STATE IN SHUTDOWN HIN232A +5V 2 2 4 Capacitors No/No 0 FN4316 Rev 1.00 Page 1 of 10 March 13, 2006HIN232A Pinout HIN232A (PDIP, SOIC) TOP VIEW +5V 1 16 C1+ V CC 16 2 15 V+ GND 3 14 C1- T1 OUT V CC 1 4 13 R1 0.1 F C2+ IN C1+ + + 2 +5V TO 10V 0.1 F 5 12 V+ R1 C2- 3 OUT VOLTAGE INVERTER C1- 6 11 T1 V- IN 4 C2+ 10 + T2 7 T2 +10V TO -10V OUT IN 6 0.1 F V- 5 VOLTAGE INVERTER 9 C2- 0.1 F R2 8 R2 IN OUT + +5V T1 14 11 400k T1 T1 OUT IN +5V T2 10 400k 7 T2 T2 OUT IN 12 13 R1 R1 IN OUT 5k R1 9 8 R2 R2 IN OUT 5k R2 GND 15 Pin Descriptions PIN FUNCTION V Power Supply Input 5V 10%. CC V+ Internally generated positive supply (+10V nominal). V- Internally generated negative supply (-10V nominal). GND Ground Lead. Connect to 0V. C1+ External capacitor (+ terminal) is connected to this lead. C1- External capacitor (- terminal) is connected to this lead. C2+ External capacitor (+ terminal) is connected to this lead. C2- External capacitor (- terminal) is connected to this lead. T Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400k pull-up resistor to V is connected to each lead. IN CC T Transmitter Outputs. These are RS-232 levels (nominally 10V). OUT R Receiver Inputs. These inputs accept RS-232 input levels. An internal 5k pull-down resistor to GND is connected to each input. IN R Receiver Outputs. These are TTL/CMOS levels. OUT FN4316 Rev 1.00 Page 2 of 10 March 13, 2006