ISL24010IVZ-T Renesas

ISL24010 Octal Voltage Level Shifter for TFT/LCD Panels Data Sheet November 4, 2005 FN6124.0 High Voltage TFT-LCD Logic Driver Features 0V to 5.5V (absolute max) Input Voltage Range The ISL24010 is a high voltage TFT-LCD logic driver with a +40V and -20V (momentary absolute max) output voltage +40V and -20V (momentary absolute max) Output Voltage swing capability. It is manufactured using the Intersils Range proprietary monolithic high voltage bipolar process and is 10mA Output Continuous Current (all 8 channels) capable of driving a 3000pF load in 500ns. 25mA Output Peak Current (all 8 channels) The ISL24010 will level shift a digital input signal to an output Rise/Fall Times 150ns/210ns voltage nearly equal to its output supply voltages. The Propagation Delay 250ns ISL24010 has 3 supplies. V and V are positive ON1 ON2 supplies with a voltage range between +10V and +40V 50kHz Input Logic Frequency (absolute max). V is the negative supply with a voltage OFF 20 Ld TSSOP Pb-Free Plus Anneal (RoHS Compliant) range between -5V and -20V (absolute max). Outputs 1 through 6 are connected to V and V . Outputs 7 and 8 ON1 OFF Applications are connected to V and V . This configuration ON2 OFF TFT-LCD panels enables outputs 1 through 6 to provide slicing to the row drivers to reduce flicker, and outputs 7 and 8 to control Pinout possible supply lines. V should remain constant. It is ON2 20 Ld TSSOP possible to tie V and V supplies together, if ON1 ON2 TOP VIEW independent control as described above is not desired. V is required to be greater than or equal to V at all ON2 ON1 GND 1 20 V ON1 times. 19 OUT1 IN1 2 The ISL24010 is available in TSSOP-20 pin package. It is IN2 3 18 OUT2 specified for operation over the -40C to +85C industrial IN3 4 17 OUT3 temperature range. IN4 5 16 OUT4 Ordering Information IN5 6 15 OUT5 IN6 7 14 OUT6 TEMP. PART PART RANGE PKG. 13 OUT7 IN7 8 NUMBER MARKING (C) PACKAGE DWG. 12 OUT8 IN8 9 ISL24010IVZ 24010IVZ -40 to +85 20 Ld TSSOP M20.173 V 10 11 V OFF ON2 (See Note) (Pb-free) ISL24010IVZ-T 24010IVZ -40 to +85 20 Ld TSSOP M20.173 (See Note) Tape and Reel (Pb-free) NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. CAUTION: These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1 1-888-INTERSIL or 1-888-468-3774 Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005. All Rights Reserved. All other trademarks mentioned are the property of their respective owners.ISL24010 Functional Diagram OUT1 Connected to V ON1 CH1 and V OFF IN1 OUT2 CH2 IN2 OUT3 CH3 IN3 OUT4 CH4 IN4 OUT5 CH5 IN5 OUT6 CH6 IN6 OUT7 Connected to V CH7 ON2 and V IN7 OFF OUT8 CH8 IN8 2