DATASHEET ISL3150E, ISL3152E, ISL3153E, ISL3155E, ISL3156E, ISL3158E FN6363 Rev.3.00 16.5kV ESD, Large Output Swing, 5V, Full Fail-Safe, 1/8 Unit Load, Aug 31, 2017 RS-485/RS-422 Transceivers The ISL315xE are IEC61000 ESD protected, 5V Features powered transceivers that meet the RS-485 and High driver V . 2.4V (Min) at R = 54 RS-422 standards for balanced communication. Driver OD D Better noise immunity, or drive up to eight outputs and receiver inputs are protected against terminations 16.5kV ESD strikes without latch-up. 16.5kV IEC61000 ESD protection on I/O bus pins Transmitters in this family deliver exceptional High transient overvoltage tolerance . 100V differential output voltages (2.4V min), into the Full fail-safe (open, short, terminated) receivers RS-485 required 54 load, for better noise immunity, or to allow up to eight 120 terminations in star High Rx I for opto-couplers in isolated designs OL topologies. Hot plug circuitry - Tx and Rx outputs remain three-state during power-up and power-down These devices have very low bus currents so they present a true 1/8 unit load to the RS-485 bus. This True 1/8 unit load for up to 256 devices on the bus allows up to 256 transceivers on the network without High data rates . up to 20Mbps using repeaters. Low quiescent supply current 600A Receiver (Rx) inputs feature a Full Fail-Safe design, Ultra low shutdown supply current 70nA which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven Applications bus. Rx outputs feature high drive levels - typically Utility meters/automated meter reading systems 28mA at V = 1V (to ease the design of optocoupled OL High node count systems isolated interfaces). PROFIBUS and Fieldbus networks, and factory Half duplex (Rx inputs and Tx outputs multiplexed automation together) and full duplex pinouts are available. See Security camera networks Table 1 on page 2 for key features and configurations by device number. Building lighting and environmental control systems Related Literature Industrial/process control networks For a full list of related documents, visit our website ISL3150E, ISL3152E, ISL3153E, ISL3155E, ISL3156E, and ISL3158E product pages Exceptional Tx Drives Up To 8 Large V Delivers Superior OD Terminations While Still Signal at Cable End for Delivering 1.5V V Enhanced Noise Immunity OD 3 140 ISL3158E 130 120 2 110 100 1 90 80 2 TERMS 8 TERMS 0 70 STANDARD 60 6 TERMS 1.5V TX 50 -1 40 1 TERM 30 -2 20 10 20Mbps, 150 UTP, DOUBLE 120 TERMS 0 -3 0 123 45 1.5 DIFFERENTIAL OUTPUT VOLTAGE (V) 20ns/DIV FN6363 Rev.3.00 Page 1 of 23 Aug 31, 2017 DRIVER OUTPUT CURRENT (mA) OUTPUT VOLTAGE (V)ISL3150E, ISL3152E, ISL3153E, ISL3155E, ISL3156E, ISL3158E TABLE 1. SUMMARY OF FEATURES DATA SLEW- PART HALF/FULL RATE RATE HOT DEVICES Rx/Tx QUIESCENT LOW POWER PIN NUMBER DUPLEX (Mbps) LIMITED PLUG ON BUS ENABLE I (A) SHUTDOWN COUNT CC ISL3150E Full 0.115 Yes Yes 256 Yes 600 Yes 10, 14 ISL3152E Half 0.115 Yes Yes 256 Yes 600 Yes 8 ISL3153E Full 1 Yes Yes 256 Yes 600 Yes 10, 14 ISL3155E Half 1 Yes Yes 256 Yes 600 Yes 8 ISL3156E Full 20 No Yes 256 Yes 600 Yes 10, 14 ISL3158E Half 20 No Yes 256 Yes 600 Yes 8 Ordering Information PART NUMBER TEMP. RANGE PACKAGE PKG. (Notes 6, 7)PART MARKING (C) (RoHS-Compliant) DWG. ISL3150EIBZ (Notes 2, 3) 3150EIBZ -40 to +85 14 Ld SOIC M14.15 ISL3150EIUZ (Notes 2, 3) 3150Z -40 to +85 10 Ld MSOP M10.118 ISL3152EIBZ (Notes 2, 3, 4) 3152EIBZ -40 to +85 8 Ld SOIC M8.15 ISL3152EIPZ ISL3152 EIPZ -40 to +85 8 Ld PDIP (Note 5)E8.3 ISL3152EIUZ (Notes 2, 3) 3152Z -40 to +85 8 Ld MSOP M8.118 ISL3153EIBZ-T (Note 1) 3153EIBZ -40 to +85 14 Ld SOIC M14.15 ISL3153EIUZ (Notes 2, 3) 3153Z -40 to +85 10 Ld MSOP M10.118 ISL3155EIBZ (Notes 2, 3) 3155EIBZ -40 to +85 8 Ld SOIC M8.15 ISL3155EIUZ (Note 2) 3155Z -40 to +85 8 Ld MSOP M8.118 ISL3156EIBZ (Notes 2, 3) 3156EIBZ -40 to +85 14 Ld SOIC M14.15 ISL3156EIUZ (Notes 2, 3) 3156Z -40 to +85 10 Ld MSOP M10.118 ISL3158EIBZ (Notes 2, 3) 3158EIBZ -40 to +85 8 Ld SOIC M8.15 ISL3158EIUZ (Notes 2, 3) 3158Z -40 to +85 8 Ld MSOP M8.118 1. 2.5k unit tape and reel option. Refer to TB347 for details on reel specifications. 2. Add -T suffix for 2.5k unit tape and reel options. Refer to TB347 for details on reel specifications. 3. Add -T7A suffix for 250 unit tape and reel options. Refer to TB347 for details on reel specifications. 4. Add T7 suffix for 1k unit tape and reel options. Refer to TB347 for details on reel specifications. 5. Pb-free PDIPs can be used for through-hole wave solder processing only. They are not intended for use in Reflow solder processing applications. 6. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 7. For Moisture Sensitivity Level (MSL), see the product information pages for ISL3150E, ISL3152E, ISL3153E, ISL3155E, ISL3156E, and ISL3158E. For more information on MSL, see TB363. FN6363 Rev.3.00 Page 2 of 23 Aug 31, 2017