ISL95855HRTZ Renesas

7/25/2018 ISL95855 Multiphase Controllers Renesas Home > All Products > Power Management > Computing Power VRM/IMVP > Multiphase Controllers > ISL95855 ISL95855 3+2+1 Voltage Regulator for IMVP8 CPUs Overview Packaging & Parametrics Documents Resources Ordering Environmental TYPICAL DIAGRAM Key Features Support Intel serial data bus interface System input power monitor (PSYS) supported Three output controller VR A configurable for 3-, 2-, 1-phase VR design VR B configurable for 2-, 1-phase VR design VR C supports 1-phase VR design 0.5% system accuracy over temperature Low supply current in PS4 state Supports multiple current sensing methods Lossless inductor DCR current sensing Precision resistor current sensing Differential remote voltage sensing Programmable SVID address Programmable VBOOT voltage at start-up Resistor programmable address selection, IMAX, slew rate, switching frequency and droop Adaptive body diode conduction time reduction Description Compliant with IMVP8, the ISL95855 provides a complete power solution for Intel microprocessors supporting core, graphics and system agent rails. The controller provides control and protection for three Voltage Regulator (VR) outputs. The VR A output can be configured for 3-, 2- or 1-phase operation. VR B is configurable for 2- or 1-phase operation and 7/25/2018 ISL95855 Multiphase Controllers Renesas VR C supports 1-phase operation. The address options programmable for these three outputs allow for maximum flexibility in support of the IMVP8 CPU. All three VRs share a common serial control bus to communicate with the CPU and achieve lower cost and smaller board area compared with a two-chip approach. Based on Intersils Robust Ripple Regulator (R3) technology, the R3 modulator has many advantages compared to traditional modulators. These include faster transient settling time, variable switching frequency in response to load transients and improved light-load efficiency due to diode emulation mode with load-dependent low switching frequency. The ISL95855 has several other key features. The controller provides PWM outputs, which support Intel DrMOS power stages (or similar) and discrete power stages using the Intersil ISL95808 high voltage synchronous rectified buck MOSFET driver. The controller complies with IMVP8 PS4 power requirements and supports power stages and drivers which are compatible. The ISL95855 supports the system input power monitor (PSYS) option. The controller supports either DCR current sensing with a single NTC thermistor for DCR temperature compensation, or more precision through resistor current sensing if desired. All three outputs feature remote voltage sense, programmable I , adjustable MAX switching frequency, OC protection and a single VR READY power-good indicator. Applications IMVP8 compliant notebooks, desktops, ultrabooks and tablets