P9122-00NBGI Renesas

Dual Channel Synchronous Step- Down Switcher with Integrated FET Advanced Datasheet IDTP9122 Features Description Input Voltage Range: 2.7V to 5.5V IDTP9122 is a fully integrated power management IC Two step-down converters with integrated FETs designed to provide 2 factory programmable voltage rails Buck1: 2A from a single 5V or 3.3V input rail with high efficiency and Buck2: 3A low quiescent currents in sleep mode or no-load condition. Buck 2 to operate in Buck or Switch mode The device offers selectable direct buck enable inputs or a Factory Programmable Output Voltage: 0.8 - 3.4V factory programmable sequencing with power good and Automatic PFM/PWM or forced PWM mode power on reset generation. Switching frequency 2MHz To support low power standby operation, the IDTP9122 Optional Programmable Sequence Mode Power Good and/or Power On Reset Output supports a configurable sleep mode. -40C to +85C operating temperature range The IDTP9122 is available in a 4mm x 4mm, 24-ld, QFN Package: QFN 24-ld 4 x 4mm x 0.8mm package and guaranteed to operate over the ambient temperature range -40C to +85C. Applications Point of Load Regulation in a variety of low power applications: Solid State Disk Drive (SSD) Power Management Low Power USB powered applications Set Top Box / TV Power Supply Portable Gaming Simplified Application Diagram INPUT VOLTAGE INPUT VOLTAGE VIN FB1 VIN FB1 PVIN1 LX1 VOUT1 PVIN1 LX1 VOUT1 PVIN2 PVIN2 PGND1 PGND1 VINSEL VREF(optional) VREF(optional) VGND VINSEL VGND DEVSLPIN DEVSLPIN GPI3 GPI3 FB2 FB2 GPIO14 GPIO14 LX2 VOUT2 LX2 VOUT2 GPIO15 GPIO15 GPO16 GPO16 GPIO17 PGND2 GPIO17 PGND2 IDTP9122 with VINSEL (pin 4) in Buck Configuration for VOUT2 IDTP9122 with VINSEL (pin 4) in Switch Configuration for VOUT2 March 12, 2014 1 2014 Integrated Device Technology, Inc. IDTP9122 Advanced Datasheet ORDERING GUIDE Table 1 Ordering Summary AMBIENT TEMP. PART NUMBER MARKING PACKAGE SHIPPING CARRIER QUANTITY RANGE P9122-00NBGI P9122-00NBGI QFN-24 4x4x0.75mm 24-ld -40C to +85C Tape or Canister 490 P9122-xxNBGI P9122-xxNBGI QFN-24 4x4x0.75mm 24-ld -40C to +85C Tape or Canister 490 P9122-xxNBGI8 P9122-xxNBGI QFN-24 4x4x0.75mm 24-ld -40C to +85C Tape and Reel 4000 IDT P 91 22 xx NBG I 8 T&R option: 8=T&R, Blank=no Temperature Grade: I=-40C to +85C Package Code Configuration ID Device ID PMIC Code Power Prefix Additional Ordering Information: The IDTP9122 will be sampled in -00 configuration, with all user configurable OTP registers at default state (0). Once a final customer configuration has been defined, a configuration specific -xx ID will be assigned and used for order and marking. ABSOLUTE MAXIMUM RATINGS Stresses above the ratings listed below can cause permanent damage to the IDTP9122. These ratings are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Table 2 Absolute Maximum Ratings SYMBOL PARAMETER MIN MAX UNIT PVIN1, PVIN2 to PGND Regulator input voltage -0.3 6.0 V VIN to GND Supply for device -0.3 6.0 V LX1, LX2 Regulator Switch Nodes -0.3 6.0 V FB1, FB2 Regulator Feedback pins -0.3 3.6 V All other pins -0.3 6.0 V TJ Operating Junction Temperature 125 C T Storage Temperature 150 C S TSOLDER Soldering Temperature (10 seconds) 260 C PD Power Dissipation (TA = 25C) 2.5 W March 12, 2014 2014 Integrated Device Technology, Inc. 2