Preliminary Data Sheet PS9317L, PS9317L2 R08DS0135EJ0500 Rev.5.00 HIGH CMR, 10 Mbps, OPEN COLLECTOR OUTPUT TYPE, Oct 30, 2015 8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER DESCRIPTION The PS9317L and PS9317L2 are optical coupled high-speed, active low type isolators containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. The PS9317L and PS9317L2 are designed specifically for high common mode transient immunity (CMR) and low pulse width distortion. The PS9317L is lead bending type (Gull-wing) for surface mounting. The PS9317L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES Pulse width distortion (t t = 35 ns MAX.) PHL PLH PIN CONNECTION (Top View) High common mode transient immunity (CMH, CML = 15 kV/s MIN.) Half size of 8-pin DIP 645 Long creepage distance (8 mm MIN. : PS9317L2) 1. Anode High-speed (10 Mbps) 2. NC High isolation voltage (BV = 5 000 Vr.m.s.) 3. Cathode 4. GND Open collector output 5. VO Pb-Free product 6. VCC Safety standards UL approved: No. E72422 CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) 132 DIN EN 60747-5-5 (VDE 0884-5) approved (Option) TRUTH TABLE APPLICATIONS LED Output Measurement equipment PDP ON L FA Network OFF H The mark <R> shows major revised points. The revised points can be easily searched by copying an<R in the PDF file and specifying it in theFind what field. R08DS0135EJ0500 Rev.5.00 Page 1 of 15 Oct 30, 2015 SHIELDPS9317L, PS9317L2 PACKAGE DIMENSIONS (UNIT: mm) Lead Bending Type (Gull-wing) For Surface Mount PS9317L 4.580.3 (0.82) 9.70.3 7.62 1.27 0.80.25 0.40.1 0.25 M Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount PS9317L2 4.580.3 (0.82) 11.50.3 7.62 1.27 0.750.25 0.40.1 0.25 M R08DS0135EJ0500 Rev.5.00 Page 2 of 15 Oct 30, 2015 3.70.25 3.70.25 3.50.2 3.50.2 6.80.25 6.80.25 0.20.15 0.20.15 0.250.15 0.250.15