Datasheet R01DS0261EJ0120 RX230 Group, RX231 Group Rev.1.20 Renesas MCUs Sep 28, 2018 54-MHz 32-bit RX MCUs, built-in FPU, 88.56 DMIPS, up to 512-KB flash memory, various communication functions including USB 2.0 full-speed host/function/OTG, CAN, SD host interface, serial sound interface, capacitive touch sensing unit, 12-bit A/D, 12-bit D/A, RTC, Encryption functions Features 32-bit RXv2 CPU core Max. operating frequency: 54 MHz PLQP0100KB-B 14 14 mm, 0.5 mm pitch Capable of 88.56 DMIPS in operation at 54 MHz PLQP0064KB-C 10 10 mm, 0.5 mm pitch Enhanced DSP: 32-bit multiply-accumulate and 16-bit PLQP0048KB-B 7 7 mm, 0.5 mm pitch multiply-subtract instructions supported Built-in FPU: 32-bit single-precision floating point (compliant to IEEE754) Divider (fastest instruction execution takes two CPU clock cycles) PWQN0064KC-A 9 9 mm, 0.5 mm pitch PWQN0048KB-A 7 7 mm, 0.5 mm pitch Fast interrupt CISC Harvard architecture with 5-stage pipeline Variable-length instructions, ultra-compact code PTLG0100KA-A 5.5 5.5 mm, 0.5 mm pitch On-chip debugging circuit PWLG0064KA-A 5 5 mm, 0.5 mm pitch Memory protection unit (MPU) supported Low power design and architecture Operation from a single 1.8-V to 5.5-V supply Up to 14 communication functions RTC capable of operating on the battery backup power supply USB 2.0 host/function/On-The-Go (OTG) (one channel), Three low power consumption modes full-speed = 12 Mbps, low-speed = 1.5 Mbps, isochronous transfer, and Low power timer (LPT) that operates during the software standby state BC (Battery Charger) supported CAN (one channel) compliant to ISO11898-1: On-chip flash memory for code Transfer at up to 1 Mbps 128- to 512-Kbyte capacities SCI with many useful functions (up to 7 channels) On-board or off-board user programming Asynchronous mode, clock synchronous mode, smart card interface Programmable at 1.8 V Reduction of errors in communications using the bit modulation For instructions and operands function On-chip data flash memory IrDA interface (one channel, in cooperation with the SCI5) 8 Kbytes (1,000,000 program/erase cycles (typ.)) 2 I C bus interface: Transfer at up to 400 kbps, capable of SMBus BGO (Background Operation) operation (one channel) RSPI (one channel): Transfer at up to 16 Mbps On-chip SRAM, no wait states Serial sound interface (one channel) 32- to 64-Kbyte size capacities SD host interface (optional: one channel) SD memory/ SDIO 1-bit or Data transfer functions 4-bit SD bus supported DMAC: Incorporates four channels Up to 20 extended-function timers DTC: Four transfer modes 16-bit MTU: input capture, output compare, complementary PWM ELC output, phase counting mode (six channels) Module operation can be initiated by event signals without using 16-bit TPU: input capture, output compare, phase counting mode (six interrupts. channels) Linked operation between modules is possible while the CPU is sleeping. 8-bit TMR (four channels) 16-bit compare-match timers (four channels) Reset and supply management Eight types of reset, including the power-on reset (POR) 12-bit A/D converter Low voltage detection (LVD) with voltage settings Capable of conversion within 0.83 s 24 channels Clock functions Sampling time can be set for each channel Main clock oscillator frequency: 1 to 20 MHz Self-diagnostic function and analog input disconnection detection External clock input frequency: Up to 20 MHz assistance function Sub-clock oscillator frequency: 32.768 kHz PLL circuit input: 4 MHz to 12.5 MHz 12-bit D/A converter On-chip low- and high-speed oscillators, dedicated on-chip low-speed Two channels oscillator for the IWDT Capacitive touch sensing unit USB-dedicated PLL circuit: 4, 6, 8, or 12 MHz Self-capacitance method: A single pin configures a single key, 54 MHz can be set for the system clock and 48 MHz for the USB clock supporting up to 24 keys Generation of a dedicated 32.768-kHz clock for the RTC Mutual capacitance method: Matrix configuration with 24 pins, supporting Clock frequency accuracy measurement circuit (CAC) up to 144 keys Realtime clock Analog comparator Adjustment functions (30 seconds, leap year, and error) Two channels two units Calendar count mode or binary count mode selectable Time capture function General I/O ports Time capture on event-signal input through external pins 5-V tolerant, open drain, input pull-up, switching of driving capacity Independent watchdog timer Encryption Functions (TSIP-Lite) 15-kHz on-chip oscillator produces a dedicated clock signal to drive Unauthorized access to the encryption engine is disabled and IWDT operation. imposture and falsification of information are prevented Safe management of keys Useful functions for IEC60730 compliance 128- or 256-bit key length of AES for ECB, CBC, GCM, others Self-diagnostic and disconnection-detection assistance functions for True random number generator the A/D converter, clock frequency accuracy measurement circuit, independent watchdog timer, RAM test assistance functions using the Temperature sensor DOC, etc. Operating temperature range External address space 40 to +85C Four CS areas (4 16 Mbytes) 40 to +105C 8- or 16-bit bus space is selectable per area Applications MPC General industrial and consumer equipment Input/output functions selectable from multiple pins R01DS0261EJ0120 Rev.1.20 Page 1 of 170 Sep 28, 2018RX230 Group, RX231 Group 1. Overview 1. Overview 1.1 Outline of Specifications Table 1.1 lists the specifications, and Table 1.2 gives a comparison of the functions of the products in different packages. Table 1.1 is for products with the greatest number of functions, so the number of peripheral modules and channels will differ in accordance with the package type. For details, see Table 1.2, Comparison of Functions for Different Packages. Table 1.1 Outline of Specifications (1/4) Classification Module/Function Description CPU CPU Maximum operating frequency: 54 MHz 32-bit RX CPU (RX v2) Minimum instruction execution time: One instruction per clock cycle Address space: 4-Gbyte linear Register set General purpose: Sixteen 32-bit registers Control: Ten 32-bit registers Accumulator: Two 72-bit registers Basic instructions: 75 (variable-length instruction format) Floating-point instructions: 11 DSP instructions: 23 Addressing modes: 10 Data arrangement Instructions: Little endian Data: Selectable as little endian or big endian On-chip 32-bit multiplier: 32-bit 32-bit 64-bit On-chip divider: 32-bit 32-bit 32 bits Barrel shifter: 32 bits Memory protection unit (MPU) FPU Single precision (32-bit) floating point Data types and floating-point exceptions in conformance with the IEEE754 standard Memory ROM Capacity: 128/256/384/512 Kbytes Up to 32 MHz: No-wait memory access 32 to 54 MHz: Wait state required. No wait state if the instruction is served by a ROM accelerator hit. Programming/erasing method: Serial programming (asynchronous serial communication/USB communication), self-programming RAM Capacity: 32/64 Kbytes 54 MHz, no-wait memory access E2 DataFlash Capacity: 8 Kbytes Number of erase/write cycles: 1,000,000 (typ) MCU operating mode Single-chip mode, on-chip ROM enabled expansion mode, and on-chip ROM disabled expansion mode (software switching) Clock Clock generation circuit Main clock oscillator, sub-clock oscillator, low-speed on-chip oscillator, high-speed on-chip oscillator, PLL frequency synthesizer, USB-dedicated PLL frequency synthesizer, and IWDT-dedicated on-chip oscillator Oscillation stop detection: Available Clock frequency accuracy measurement circuit (CAC) Independent settings for the system clock (ICLK), peripheral module clock (PCLK), external bus clock (BCLK), and FlashIF clock (FCLK) The CPU and system sections such as other bus masters run in synchronization with the system clock (ICLK): 54 MHz (at max.) MTU2a runs in synchronization with the PCLKA: 54 MHz (at max.) The ADCLK for the S12AD runs in synchronization with the PCLKD: 54 MHz (at max.) Peripheral modules other than MTU2a and S12ADE run in synchronization with the PCLKB: 32 MHz (at max.) Devices connected to external buses run in synchronization with the BCLK: 32 MHz (at max.) The flash peripheral circuit runs in synchronization with the FCLK: 32 MHz (at max.) Resets RES pin reset, power-on reset, voltage monitoring reset, watchdog timer reset, independent watchdog timer reset, and software reset Voltage detection Voltage detection circuit When the voltage on VCC falls below the voltage detection level, an internal reset or internal interrupt (LVDAb) is generated. Voltage detection circuit 0 is capable of selecting the detection voltage from 4 levels Voltage detection circuit 1 is capable of selecting the detection voltage from 14 levels Voltage detection circuit 2 is capable of selecting the detection voltage from 4 levels R01DS0261EJ0120 Rev.1.20 Page 2 of 170 Sep 28, 2018