+ + Security Link Over Coax (SLOC) Receiver TW3811 Features SLOC (Security Link Over Coax) is a transmission protocol for Simultaneous transmission of IP video data and analog simultaneously transmitting analog CVBS video and digital IP CVBS video over up to 500m of RG59 coaxial cable video over a single coaxial cable. Analog CVBS video preview support The TW3811 is the receiving end of a SLOC link, converting the Proprietary adaptive analog equalizer for extending the single SLOC signal on the coaxial cable back to separate reach of CVBS video Ethernet digital video data and analog CVBS video. It can be Proprietary SLOC-based IP camera detection embedded into a DVR to enable one or more SLOC inputs or Creates a full-duplex 100BASE-T digital link configured as a stand-alone SLOC-to-IP+CVBS converter. 36Mbps downlink speed from TW3801 to TW3811 The TW3811 includes an AFE, digital modem, and two 4Mbps uplink for SLOC compliance Ethernet MII/RMII interfaces. The device accepts a SLOC Ethernet MAC MII/RMII interface for interfacing to DVR/NVR output signal from a SLOC transmitter and decodes it into an network processor SoC analog CVBS signal and an Ethernet MII signal. Optional Ethernet PHY MII/RMII interface for interfacing to Applications external Ethernet PHY chip 2 Single-Channel SLOC receiver modem I C 2-wire control interface Multi-Channel SLOC receiver modem Integrated PLL with 25MHz crystal interface 1.8V, 3.3V supplies Embedded DVR 100-TQFP (12x12mm) Package Application Block Diagram IP Camera SLOC Adapter Module One-Channel SLOC Receiver MCU MCU SPOT (optional) (optional) Monitor Analog Analog CVBS CVBS Up to 500m of EL8101 RG59 cable DVR TW3801 TW3811 Ethernet Network 100BASE-T 100BASE-T Ethernet Switch PHY PHY NVR Simplified Application Schematic 3.3V 3.3V 1.8V V V V DD A DD IO DD D MII or SLOC COAX IN MII / RMII Ethernet Coax I/O RMII RJ45 22F Interface I/O PHY 0.1F COAX OUT 24k TW3811 470F LOAD DRV 10F 10k 470F 75 75 CVBS OUT 75 CVBS Output 3.3V 150nH BAT54 1M 4.7k 25MHz 10F 1.5k 2 I C 22pF 22pF Microcontroller November 29, 2012 CAUTION: These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1 1-888-INTERSIL or 1-888-468-3774 Copyright Intersil Americas Inc. 2012. All Rights Reserved FN8284.1 Intersil (and design) and SLOC are trademarks owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners. XTAL IN XTAL OUT SCL SDA +TW3811 For additional products, see www.intersil.com/product tree Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted in the quality certifications found at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN8284.1 2 November 29, 2012