Preliminary Datasheet PD70F3826, 70F3827, 70F3828, 70F3829, 70F3830, 70F3831, R01DS0029EJ0001 70F3832, 70F3833, 70F3834, 70F3835, 70F3836, 70F3837 Rev.0.01 Sep 30, 2010 V850ES/JE3-E, V850ES/JF3-E, V850ES/JG3-E RENESAS MCU Description The PD70F3826, 70F3827, 70F3828, 70F3829 (V850ES/JF3-E), and PD70F3830, 70F3831, 70F3832, 70F3833 (V850ES/JF3-E), and PD70F3834, 70F3835, 70F3836, 70F3837 (V850ES/JG3-E) are products of the V850 32-bit single-chip microcontrollers, and include peripheral functions such as ROM/RAM, timer/counters, serial interfaces, an A/D converter, a DMA controller , a CAN controller , a USB function controller , and a Ethernet controller. In addition to their high real-time responsiveness and one-clock-pitch execution of instructions, the V850ES/JE3-E, V850ES/JF3-E, and V850ES/JG3-E include instructions executed via a hardware multiplier, saturation instructions, and bit manipulation instructions. Detailed function descriptions are provided in the following users manuals. Be sure to read them before designing. V850ES/JE3-E, V850ES/JF3-E, V850ES/JG3-E Hardware Users Manual: To be prepared V850ES Architecture Users Manual: U15943E Features Number of instructions: 83 Timer/counters Minimum instruction execution time: 16-bit timer/event counter AA (TAA): 5 channels 20 ns ( 50 MHz operation with main clock (fXX)) 16-bit timer/event counter AB (TAB): 1 channel Clock Motor control function supported Main clock oscillation: fX = 3 to 6.25 MHz 16-bit interval timer M (TMM): 4 channels Subclock oscillation: fXT = 32.768 kHz 16-bit encoder timer T (TMT): 1 channel Internal oscillation: fR = 220 kHz (TYP.) Real-time counter: 1 channel General-purpose registers: 32 bits 32 registers Watchdog timer: 1 channel Instruction set: Real-time output function: 6 channels Signed multiplication, saturation operations, 32-bit A/D converter: 10-bit resolution 10/10 channels shift instructions, bit manipulation instructions, Ethernet controller: 1 channel load/store instructions USB function controller: 1 channel Memory space: Serial interface 64 MB linear address space CAN :1 channel (PD70F3829, 70F3833, 70F3837 only) Internal memory Asynchronous serial interface C(UARTC): 3/4 channels Flash memory: 64/128/256 KB Clocked serial interface F(CSIF): 2/3/5 channels 2 RAM: 32/48/64 KB I C bus interface: 2/3 channels (Including 16 KB of data RAM area) DMA controller: 4 channels I/O lines Total: 26/42/62 Power save function: Interrupts and exceptions HALT/IDLE1/IDLE2/STOP/subclock/sub-IDLE mode Non-maskable interrupts: 2 sources On-chip debug function Maskable interrupts: 63/78/85 sources Package: 64-pin LQFP (V850ES/JE3-E) 64-pin WQFN (V850ES/JE3-E) 80-pin LQFP (V850ES/JF3-E) 100-pin LQFP (V850ES/JG3-E) 113-pin FBGA (Under planing) Operating supply voltage: 2.85 to 3.6 V R01DS0029EJ0001 Rev.0.01 Page 1 of 75 Sep 30, 2010 PD70F3826, 70F3827, 70F3828, 70F3829, 70F3830, 70F3831, 70F3832, 70F3833, 70F3834, 70F3835, 70F3836, 70F3837 Function list (V850ES/JE3-E) Generic Name V850ES/JE3-E Product Name PD70F3826 PD70F3827 PD70F3828 PD70F3829 Internal Flash memory 64 KB 128 KB 256 KB 256 KB memory Internal RAM 16 KB 32 KB 48 KB 48 KB Data RAM 16 KB 16 KB 16 KB 16 KB Memory space 64 MB General-purpose register 32 bits 32 registers Clocks Main clock oscillation PLL mode : fX = 3 to 6.25 MHz, fXX = 24 to 50 MHz (multiplication by 8) Clock through mode : fX = 3 to 6.25 MHz ( internal : fXX = 3 to 6.25 MHz) Subclock oscillation fXT = 32.768 kHz Internal oscillation fR = 220 kHz (TYP.) Minimum instruction 20 ns ( 50 MHz operation with main system clock (fXX)) execution time I/O ports I/O: 26 (5 V tolerant : 12) Timer 16-bit TAA 5 channels (among which two channels have the interval function only) 16-bit TAB 16-bit TMM 4 channels 16-bit TMT 1 channel (Interval function only) Motor control Watch timer 1 channel (RTC) WDT 1 channel Real-time output function 6 bits 1 channel 10-bit A/D converter 10 channels Serial CSIF/UARTC 1 channel 2 interface CSIF/UARTC/IC 1 channel CSIF 2 UARTC/I C 1 channel 2 UARTC/I C/CAN 1 channel USB function 1 channel Ethernet controller 1 channel DMA controller 4 channels (transfer target: on-chip peripheral I/O, internal RAM) Note 1, 2 Interrupt External 7(7) 7(7) 7(7) 7(7) source Internal 54 54 54 58 Power-save function HALT/IDLE1/IDLE2/STOP/subclock/sub-IDLE modes Reset factor RESET pin input, watchdog timer 2 (WDT2), clock monitor (CLM), low-voltage detector (LVI) On-chip debugging MINICUBE , MINICUBE2 supported Operating supply voltage 2.85 to 3.6 V Operating ambient temperature 40 to +85C Package 64-pin plastic LQFP (fine pitch) (10 10 mm), 64-pin plastic WQFN (9 9 mm), Notes 1. The figure in parentheses indicates the number of external interrupts that can release the STOP mode. Notes 2. Include NMI. R01DS0029EJ0001 Rev.0.01 Page 2 of 75 Sep 30, 2010