XP Family of Ultra-low Phase Noise XP Quartz-based PLL Oscillators Datasheet Description Features Output types: LVDS, LVPECL, CML The XP devices are ultra-low phase noise quartz-based PLL oscillators supporting a large range of frequencies and output Frequency range: 15MHz to 2100MHz interface types. These devices are designed to operate at three Output type: HCSL different power supplies and are available in three package sizes Frequency range: 15MHz to 725MHz with several pinout configurations, as well as three operational Supply voltage options: 1.8V, 2.5V, or 3.3V temperature ranges. Phase jitter (12kHz to 20MHz): 120fs typical The XP devices can be programmed to generate an output Package options: frequency from 15MHz to 2100MHz with a resolution as low as 1Hz accuracy. The configuration capability of this family of devices 7.0 5.0 1.7 mm allows for fast delivery times for both sample and large production 5.0 3.2 1.17 mm orders. 3.2 2.5 1.07 mm Parts are for one time programming (OTP) at the factory for a Operating temperatures and frequency stability: fixed frequency application, or can be field programmable using -40C to +85C, 25ppm I2C, based on system needs (see note 1 under Pin Descriptions). -40C to +105C, 50ppm Pin Assignments Figure 1. 7.0 5.0 mm, 5.0 3.2 mm, and 3.2 2.5 mm Packages SDA 7 OE 1 6 VDD NC 2 5 OUT0b GND 3 4 OUT0 8 SCL Table 1. Pin Descriptions Pin Pin Name Description 1 OE Output Enable (0 = output disabled, pulled high internally) 2 NC No connect 3 GND Connect to ground 4 OUT0 Output 5 OUT0b Complementary output 6 V Supply voltage DD 1 7 SDA Serial data 1 8 SCL Serial clock 1 Pins 7 and 8 are no connect for non-I2C applications. See Ordering Information for more details. 2020 Renesas Electronics Corporation 1 September 21, 2020XP Datasheet Contents Description 1 Features 1 Pin Assignments 1 Absolute Maximum Ratings . 3 ESD Compliance . 3 Mechanical Testing . 3 Solder Reflow Profile 3 DC Electrical Characteristics 4 AC Electrical Characteristics 7 Output Waveforms . 10 Termination for 3.3V LVPECL Outputs . 12 Termination for 2.5V LVPECL Outputs . 13 LVDS Driver Termination 14 Recommended Termination for HCSL Outputs . 15 CML Termination 15 Package Outline Drawings . 16 Marking Diagrams . 16 Ordering Information . 17 Revision History . 18 2020 Renesas Electronics Corporation 2 September 21, 2020