ZIOL2211 IO-Link-Compliant HV Line Driver (Single Channel) Feature Sheet Brief Description Benefits The ZIOL2211 is a line driver/level shifter IC that Configurable feature set provides an HV* I/O channel with a wide range of Nonvolatile storage of system configuration configurable system features. It addresses the physi- Excellent electromagnetic compatibility (EMC) cal layer of sensor/actuator systems in factory auto- performance due to adjustable output slew rate mation applications, and it is specifically designed to control support the communication standard IO-Link . Low R : 6.6 DSon The output driver is a push-pull stage that reaches Programmable limitation of driver output current an R of less than 6.6 at all operational tem- DSon EEPROM read/write functionality within entire peratures. operating temperature range The configuration is stored in an on-chip EEPROM Space saving package options and automatically loaded into the ZIOL2211s control register during power-up. The ZIOL2211 also provides status information, such as overload and Available Support over-temperature conditions. An integrated SPI Evaluation Kits interface supports access to configuration and status Application Notes registers. The ZIOL2211 is fabricated in a powerful CMOS Physical Characteristics mixed-signal technology allowing supply voltages up to 40V. EEPROM read/write functionality is guar- Operation temperature: -40 to +85 C anteed within the entire operating temperature range Supply voltage: 8.0V to 36.0V in combination with a low-voltage 3.3V core supply. Package options: RoHS-compliant QFN24 4x4mm Features WL-CSP35 2.5x2.5mm Configurable output current limitation: 56mA to 410mA ZIOL2211 Application Circuits Standard cable driver / physical-layer transceiver for IO-Link (device) SIO sensor ZIOL2211 Traditional PLC Slew-rate controlled driver Wide range for configurable feature set that is automatically loaded after power-on reset IO-L sensor ZIOL2211 ZIOL24x1 IO-Link-specific WURQ detection On-chip registers and EEPROM for system IO-L configuration and status information actuator ZIOL2211 ZIOL24x1 SPI interface for accessing on-chip registers and IO-Link PLC EEPROM (master) IO-L sensor ZIOL2211 ZIOL24x1 Digital interface: 3.3V output, 5V-tolerant inputs IC temperature monitoring/diagnosis Over-current and over-temperature indication sensor ZIOL2211 * HV: high voltage (maximum power supply / signal swing is 36V) IDT is a member of the IO-Link Community: www.io-link.com IO-Link device wake-up 2016 Integrated Device Technology, Inc. 1 April 20, 2016 ZIOL2211 IO-Link-Compliant HV Line Driver (Single Channel) Feature Sheet Typical Applications ZIOL2211 Block Diagram In field applications, the ZIOL2211 Cable Side Application Side High Voltage (HV) acts as a universal cable driver. Low Voltage (LV) Signals Signals The ZIOL2211 can support IO-Link communications as a physical-layer transceiver (PHY) for IO-Link ZIOL2211 devices. Power Configuration Control Supply Diagnosis Common applications: Actuator, 24V line driver/level shifter Application Sensor, COM Circuit IO-Link-compliant devices or Power RX/TX Interface Ch 0 to Host See the ZIOL2xxx IC Family Data Sheet System for detailed technical information. Cable Single channel transceiver GND Ordering Information Product Sales Code Description Package ZIOL2211BI1R Single Channel IO-Link compliant HV Line Driver, 4x4mm QFN24 13 reel ZIOL2211BI1W Single Channel IO-Link compliant HV Line Driver, 4x4mm QFN24 7 reel IO-Link Lab Kit V2.0 ZIOL2401 Lab Kit for detailed laboratory evaluation: configurable IC/Communication/Controller Board, USB cable software is available for download from