EZTEXT RF Solutions

SMS Text EZTEXT GSM Remote Control System Features Two way remote control via SMS Text Easy to install and configure using SMS text message No PC required. 2 digital inputs (volt free) 2 x Relay Changeover Contacts rated 240Vac 5A Optional external temperature measurements User can set inputs and outputs names Waterproof enclosure rated IP68 Worldwide Quad Band GSM. Applications Remote Maintenance, warnings / Alarms/ Reset. Heating Systems Irrigation Systems. GSM Network EZTEXT Remote system monitoring. Plant Maintenance. Security Systems Alert / Panic caller Inputs outputs Description EZTEXT is a self contained two way Remote Control System which provides two changeover contact switches and two no volt switch detect inputs. EZTEXT will send text messages to up to five users if its input is activated or at a temperature set point. A user can control EZTEXT switches by sending text messages. Custom mes- sages may be set easily via configuration text messages. DS-EZTEXT-6 SMS TextEZTEXT Ordering Information PART No Description EZTEXT GSM telemetry system IP68 enclosure BAT-EZTEXT-2 Optional lithium battery 950mAH PSU-12V1A-IP Power supply IP67 CBA-UFLSMA Cable assembly for external antenna CBA-EZTEMP2 Temperature sensor cable Insert SIM card Insert Simcard Here 1. Slide retaining clip to the Left and open. 2. Place Nano sim on base. 3. Close Lid and slide to the Right to lock. Please note: Insert nanoSIM Card before applying power (standard 3 Volt SIM only). The message memory of the SIM card should be clear before it is fitted. Ensure that the SIM card has not been PIN code protected Beware of Pay-as-you-go SIM which require regular top-up to remain active. It is recommended to bar Incoming voice calls to the SIM card to avoid error messages being sent back to the user. This can be achieved by calling the service provider. The SIM card should be inserted into EZTEXT before applying power RF Solutions recommends O2 and Vodaphone SIM card and has carried out extensive testing using the SIM cards we have for these two networks. Problems have been identified with Orange SIM cards with this product. No guarantee can be given for the operation of this product with any network except those that have been tested by RF Solutions. Connect inputs/outputs and power connections The EZTEXT unit can be powered from 9 to 24Vdc. Inputs are VOLT free. Outputs are Relay Changeover Contacts as shown below. 1 2 1 2 Supply Outputs Inputs Terminals DS-EZTEXT-6