F1 B1 F1 B1 Plastic enclosures KS Width: 200 600, height: 300 600 B 1.2 Material: Supply includes: Note: Of course, all enclosures can Enclosure and door: Enclosure of solid all-round con- Under the influence of long-term also be supplied spray-finished Fibreglass-reinforced unsaturat- struction, UV radiation (sunlight) in con- in RAL colours. For outdoor sit- ed polyester r/h door hinge, junction with wind and rain, the ing, we recommend pale Mounting plate: door hinge may be swapped to surface finish may become visu- shades. Sheet steel opposite site by rotating the ally impaired. Approvals, For KS with viewing window: enclosure, In other words, the fibreglass see page 27. Impact resistant glazed acrylic, mounting plate, portions become visible on 3.0 mm with all-round all-round foamed-in PU seal in unprotected surfaces. This does Detailed drawing, rubber cable clamp strip the door, not impair the protection of the see page 1087. twin seal on the top and bottom installed electrical components Surface finish: edges of the door (integral rain in any way. All other surface Enclosure and door: protection strip), press-fitted finishes are likewise impaired No after-treatment, C sections at the sides for infi- by ultraviolet radiation. dyed plastic, nitely variable mounting plate If the enclosures cannot be pro- similar to RAL 7032 depth adjustment. tected from radiation, e.g. via a Mounting plate: Zinc-plated sun canopy, we recommend that Protection category: they should be painted with a KS without viewing window: PUR paint. Older enclosures IP 66 to EN 60 529/10.91, where the surface finish already complies with NEMA 4x. reveals visible fibreglass por- KS with viewing window: tions can likewise be treated in IP 56 to EN 60 529/10.91, this way after thorough cleaning. complies with NEMA 12. Packs of Without viewing window With viewing window Width (B1) in mm 200 250 300 400 400 500 600 400 400 500 600 Height (H1) in mm 300 350 400 400 600 500 600 400 600 500 600 Depth (T1) in mm 150 150 200 200 200 300 200 200 200 300 200 Mounting plate width 145 195 245 345 345 417 545 345 345 417 545 (F1) in mm Mounting plate height 250 300 350 350 550 450 550 350 550 450 550 (G1) in mm Mounting plate thickness 2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 in mm Model No. KS 1 1423.600 1432.600 1434.600 1444.600 1446.600 1453.600 1466.600 1448.600 1449.600 1454.600 1467.600 Door(s) 1 1 1 1 1 1 1 1 1 1 1 Weight (kg) 3.0 4.1 6.0 7.9 11.5 12.9 15.9 8.0 11.5 13.4 15.9 Lock systems Standard double-bit lock insert may be exchanged for lock inserts, type A, see page 888, and plastic handle, type E, KS 1484.000, see page 886. Cable gland, polyamide, Double-membrane gland Model No. see page 972. and stepped collar for cable entry, Model No. see page 973. Accessories Page 832 KS Ex-proof Page 288 Rittal Catalogue 31/Industrial enclosures 123 T1 H1 G1 H1 G1 Plastic enclosures KSX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Rittal manufacturer: Other Similar products are found below : EB1546 KL1501 KL1590 3652070 1002.600 1004.600 1033.500 1036.500 1037.500 1076.500 1077.500 1302.600 1338.500 1380.500 1505.510 1506.510 1508.510 1510.510 1514.510 1517.510 1518.510 1577.450 1578.450 1578.530 1579.450 9514.000 9521.050 1434.500 1444.500 1446.500 1519.510 1522.010 1523.010 1524.010 1525.010 1526.010 1527.010 1527.510 1529.010 1530.010 1530.510 1533.510 1534.510 1535.510 1536.510 1537.510 1538.510 1539.510 1540.510 1541.510