25 / 50MHz Arbitrary Function Generator HMF2525 / HMF2550 st 1 Quarter 2009 Generation of complex waveforms with 256kpts in 14 Bit Frequency range 10Hz...25MHz/50MHz Output voltage 5mV ...10V (into 50) DC Offset 5mV...5V pp pp Arbitrary waveform generator: 250MSa/s, 14Bit, 256kPts Sine, Square, Pulse, Triangle, Ramp, Arbitrary waveforms incl. standard curves (white, pink noise etc.) All parameters at a glance on the 3.5 TFT and Total harmonic distortion 0.04% (f100kHz) interactive softkeys Burst, Sweep, Gating, external Trigger Rise time 8ns, in pulse mode 8ns...500ns variable-edge-time Pulse mode: Frequency range 100Hz...12.5MHz/25MHz, pulse width 10ns999s, resolution 5ns Modulation modes AM, FM, PM, PWM, FSK (int. and ext.) Ethernet/USB-interface HO730 for industrial use 10MHz Timebase: 1ppm TCXO, rear I/O BNC connector (Option) Front USB connector: save & recall of set-ups and waveforms 3.5 TFT: crisp representation of the waveform and all parameters Galvanically isolated USB/RS-232 Dual-Interface, optional Ethernet/USB or IEEE-488 HMF2550Level TTL (protected up to 30V) 25MHz Arbitrary Function Generator HMF2525 Edge Positive/ negative (selectable) 50MHz Arbitrary Function Generator HMF2550 Pulse width Min. 100ns Trigger output: BNC socket (frontside) All data valid at 23 C after 30 minute warm-up Impedance 50 Frequency Edge Positive TTL level impulse HMF2525: 10Hz25MHz Frequency 10MHz max. HMF2550: 10Hz50MHz Modulation input: BNC socket (rear side) Temperature stability: 1ppm (18C...28C) Impedance 10k Aging (after 1 year): 1ppm (25C) Max. input voltage 5V for full scale Amplitude Bandwidth (- 3dB) DC...50kHz (sample with 250kSa/s) Output voltage: 5mV ...10V (into 50) Reference input: BNC socket (rear side) pp pp Resolution: 1mV Impedance 1k Setting accuracy: (1% of control + 1mV ) at 1kHz Frequency 10MHz 100kHz ss Frequency response: f 10MHz: 0.1dB Input voltage TTL 10MHz f 25MHz: 0.2dB Reference output: BNC socket (rear side) 25MHz f 50MHz: 0.4dB Impedance 50 DC offset: Frequency 10MHz Voltage range (AC + DC) 5mV...5V (into 50) Output voltage 1,65V (into 50) pp Accuracy 2% of offset Ramp output: BNC socket (rear side) 0.5% of signal level Impedance 200 2mV Output voltage 0...5V, synchronous with sweep Units: V , V , dBm Sweep pp rms Waveform Sine Wave Signals: All Total harmonic distortion (1V ): Type: linear/log. pp f 100kHz: -70dBc Direction: up/down 100kHz f 10MHz -55dBc Sweep time: 1ms...500s 10MHz f 25MHz -40dBc Burst f 25 MHz -37dBc Signals: All Spurious: (Non-harmonics 1V ) Typ: Triggered, 1...50.000 cycles, endless pp f 1MHz: -70dBc or Gate controlled 1MHz f 50MHz -70dBc + 6dBc/Oktave Start / stop phase: -360...+360 Total Harmonic Distortion (f 100kHz): 0.04% typ. Trigger source: Manual, internal or external via Trigger Phase noise: source or interface (10MHz, 10kHz Offset, 1V ) -115dBc/Hz typ. Internal Trigger period: 1s...500s pp Waveform Rectangle Modulation Rise/fall time: 8ns Waveform modulation: AM, FM, PM, PWM, FSK Overshoot: 3% typ. Waveform carrier: All (without pulse) Symmetry (50% duty): 1% + 5ns Internal modulation (ripple): Sine, Rectangle, Triangle, Ramp, Jitter (RMS): 1ns typ. Arbitrary with up to 4096Pts. Waveform Pulse Internal modulation frequency: 10Hz...50kHz Frequency range: Ext. modulation bandwidth (-3dB): DC...50kHz (sampled with 250kSa/s) HMF2525 100Hz12.5MHz Amplitude modulation: HMF2550 100Hz25MHz Modulation depth 0...100% Amplitude: 5mV...+5V respectively -5mV...-5V (into 50) Frequency modulation: Rise / fall time: 8ns, variable up to 500ns Frequency deviation Max. 10MHz Pulse width: 10ns...999s Phase modulation: Resolution: 5ns Phase deviation -180...+180 Jitter (RMS): 500ps typ. Pulse width modulation: Overshoot: 3% typ. Deviation 0...100% of the pulse width Waveform Rampe, Triangle Miscellaneous Frequency range: Display: 3,5 color TFT QVGA 65k colors HMF2525 10Hz5MHz Interface: Dual-Interface USB/RS-232 (HO720) HMF2550 10Hz10MHz Save / Recall memory: 10 complete set-ups Symmetry: 0...100% Protection class: Safety class I (EN61010-1) Linearity: Power supply: 105/253V, 50 /60Hz, CAT II f 250kHz 0,1% typ. Power consumption: approx. 30Watt f 250 kHz 2% typ. Operating temperature: +5C...+40C Waveform Arbitrary Storage temperature: -20C...+70C Frequency range: Max. rel. humidity: 5%...80% (non condensing) HMF2525 10Hz12.5MHz Dimensions (W x H x D): 285 x 75 x 365mm HMF2550 10Hz25MHz Weight: 3,4kg Sample rate: 250MSa/s Amplitude resolution: 14Bit Bandwidth (- 3dB): 50MHz Signal length: Up to 256kPts Accessories supplied: Line cord, Operating manual, CD Non-volatile memory: Optional accessories: HMF2525 512kPts HO730 Dual-Interface Ethernet/USB HMF2550 1MPts HO740 Interface IEEE-488 (GPIB), galvanically isolated Predefined waveforms: Exponential rise/fall, Sin(x)/x, Cardiac, HZ42 2RU 19 Rackmount Kit white/pink noise HZ33 Test cable BNC plug - BNC plug 0,5m Inputs and Outputs HZ34 Test cable BNC plug - BNC plug 1m Signal output: BNC socket (frontside), short-circuit-proof, HZ20 Adapter plug BNC plug - 4mm safety sockets ext. voltage 15V max. HZ10S 5 x silicone test lead (measurement connection in black) Impedance 50 HZ10R 5 x silicone test lead (measurement connection in red) Gate / Trigger input: BNC socket (frontside) HZ24 Attenuators 3/6/10 and 20 dB Impedance 5k 100pF www.hameg.com HMF2525/2550E/031108/ce Subject to alterations HAMEG Instruments GmbH DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM HAMEG Instruments GmbH Industriestr. 6 D-63533 Mainhausen Tel +49 (0) 6182 800 0 Fax +49 (0) 6182 800 100 www.hameg.com info hameg.com