HM8150 Function Generator Technical Data Key facts Frequency range: 10 m Hz to 12.5 MHz Output voltage: 10 mV to 10 V (into 50 ) pp pp W aveforms: Sine wave, square wave, triangle, pulse, sawtooth, arbitrary Rise and fall time <10 ns Pulse width adjustment: 100 ns to 80 s Arbitrary waveform generator 40 MSa/s Burst, gating, external triggering, sweep Free of charge software for remote control and for creation of arbitrary waveforms External amplitude modulation (bandwidth 20k Hz) Intuitive operation with one touch of a button quick change of signals Galvanically isolated USB/RS-232 dual-interface, optional IEEE-488 (GPIB) Technical Data PD 5210.8737.32 - 01.00Max. input voltage 30 V Technical Data Outputs Signal output BNC connector, short circuit proof, ext. voltage up to 15 V 12,5 MHz Arbitrary Funktionsgenerator Impedance 50 HM8150 Output voltage All data valid at 23 C after 30 minutes warm-up. Range 1 2,1 to 20 Vpp (open circuit) Frequency Range 2 0,21 to 2,0 V (open circuit) pp Range 10 mHz to 12,5 MHz Range 3 20 to 200 mV (open circuit) pp Resolution 5 digit, max. 10 mHz Resolution Accuracy (1 Digit + 5 mHz) Range 1 100 mV Temperature coefficient 0,5 ppm/C Range 2 10 mV Aging 2 ppm/year Range 3 1 mV Waveforms Setting accuracy (1 kHz) Sine wave Range 1 2 % Frequency range 10 mHz to 12,5 MHz Range 2 3 % Amplitude 20 mV to 20 V (open circuit) pp pp Range 3 4 % Harmonic Distortion 1 Vpp 3 % additional for pulse and square wave f <500 kHz -65 dBc Frequency response 500 kHz f <5 MHz -50 dBc <100 kHz 0,2 dB 5 MHz f 12.5 MHz -40 dBc 0,1 to 12,5 MHz 0,5 dB Total Harmonic Distortion 1 Vpp Offset error f <100 kHz typ. 0,05 % Range 3 50 mV Spurious (Non-Harmonic) 1 V pp Display 2 digits (LCD) f <500 kHz -65 dBc Trigger output BNC connector 500 kHz f 12.5MHz -65 dBc + 6 dBc/octave Level 5 V/TTL Square wave Impedance 50 FrequenzRange 10 mHz to 12,5 MHz Sawtooth output BNC connector Amplitude 20 mV to 20 V (open circuit) pp pp Output voltage 0 to 5 V, synchronous to sweep Anstiegs-/Abfallzeit <10 ns Impedance 1 k Overshoot <5 % (Uout 200 mV) DC-Offset Symmetry 50 % (5 % +10 ns) Output voltage Pulse Range 1 -7.5 to +7.5 V (open circuit) Frequency range 10 mHz to 5 MHz Range 2 -0.75 to +0.75 V (open circuit) Amplitude 10 mV to +10 V or pp pp -10 mVpp to -10 Vpp Range 3 -75 to +75 mV (open circuit) Vac range + 2 x Voffset range Vrange max Rise/fall time <10 ns Sweep (internal) Pulse width 100 ns to 80 s Setting of start and stop frequencies Duty cycle max. 90 % Internal sweep all waveforms Sawtooth Frequency range 10 mHz to 25 kHz Sweep time linear, 20 ms to 100 s continuous or triggered (ext. signal, interface) Amplitude 20 mV to 20 V (open circuit) pp pp Amplitude Modulation Linearity better than 1% Modulation via external signal Triangle Modulations depth 0 to 100 % Frequency range 10 mHz to 250 kHz Bandwidth DC to 20 kHz (-3 dB) Amplitude 20 mV to 20 V (open circuit) pp pp Gate (asynchronuous) Linearity better than 1% Modulation on/off via external TTL signal Arbitrary-Generator Delay time <150 ns Frequency range 10 mHz to 250 kHz Input singal TTL Amplitude 20 mV to 20 V (open circuit) pp pp Trigger Function (synchronuous) Output rate 40 MSa/s Burst mode via ext. trigger input or interface Resolution X 1.024 (10 Bit), Y 1.024 (10 Bit) or X 4.096 (12 Bit), Y 4.096 (12 Bit) Frequency range <500 kHz Miscellaneous Inputs Gate/Trigger BNC connector Interface Dual-Interface USB/RS-232 (HO820), IEEE-488 (GPIB) (optional) Impedance 5 k II 100 pF Display 16 characters, LCD with backlight Max. input voltage 30 V Modulation Input BNC connector Memory for the last device settings and for 1 arbitrary signal Impedance 10 k