BA3404F-E2 ROHM

Datasheet Operational Amplifiers Series Ground Sense Operational Amplifiers BA3404xxx General Description Packages W(Typ.)xD(Typ.) xH(Max.) BA3404 is a dual operational amplifier with input and SOP8 5.00mm x 6.20mm x 1.71mm output ground sense. Especially, BA3404 have wide SOP-J8 4.90mm x 6.00mm x 1.65mm operating voltage range +4V to +36V (single supply). MSOP8 2.90mm x 4.00mm x 0.90mm BA3404 have a good performance of slew rate and cross over distortion compare with BA2904. Key Specification Wide Operating Supply Voltage (single supply): +4.0V to +36.0V Features (split supply): 2.0V to 18.0V Operable with a single power supply Slew Rate: 1.2V/s(Typ.) Wide operating supply voltage Wide Temperature Range: -40C to +85C Input and output are operable GND sense Input Offset Current: 5nA (Typ.) Low supply current Input Offset Voltage: 5mV (Max.) High open loop voltage gain Internal ESD protection circuit Application Current sense application Buffer application amplifier Active filter Consumer electronics Block Diagrams VCC -IN OUT +IN VEE Figure 1. Simplified schematic Product structureSilicon monolithic integrated circuit This product is not designed protection against radioactive rays. www.rohm.com TSZ02201-0RAR1G200140-1-2 2012 ROHM Co., Ltd. All rights reserved. 1/19 26.OCT.2012 Rev.001 TSZ2211114001 BA3404xxx Datasheet Pin Configuration(TOP VIEW) Pin No. Symbol 1 OUT1 OUT118 VCC 2 -IN1 3 +IN1 CH1 27 -IN1 OUT2 4 VEE - + 5 +IN2 +IN136 -IN2 CH2 6 -IN2 + - 7 OUT2 45 +IN2 VEE 8 VCC Package SOP8 SOP-J8 MSOP8 BA3404F BA3404FJ BA3404FVM Ordering Information B A 3 4 0 4 x x x - x x Part Number. Package Packaging and forming specification BA3404xxx F : SOP8 E2: Embossed tape and reel FJ : SOP-J8 (SOP8/SOP-J8) FVM : MSOP8 TR: Embossed tape and reel (MSOP8) Line-up Supply Slew Rate Orderable Topr Current Package (Typ.) Part Number (Typ.) SOP8 Reel of 2500 BA3404F-E2 -40C to +85C 2.0mA 1.2V/s SOP-J8 Reel of 2500 BA3404FJ-E2 MSOP8 Reel of 3000 BA3404FVM-TR Absolute Maximum Ratings (Ta=25) Parameter Symbol Ratings Unit Supply Voltage VCC-VEE +36 V *1*4 SOP8 780 *2*4 Power dissipation Pd SOP-J8 675 mW *3*4 MSOP8 590 *5 Differential Input Voltage Vid +36 V Input Common-mode Voltage Range Vicm (VEE-0.3) to (VEE+36) V Operating Temperature Range Topr -40 to +85 Storage Temperature Range Tstg -55 to +150 Maximum Junction Temperature Tjmax +150 Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application if voltage in excess of absolute maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of characteristics. *1 To use at temperature above Ta25 reduce 6.2mW/ *2 To use at temperature above Ta25 reduce 5.4mW/ *3 To use at temperature above Ta25 reduce 4.8mW/ *4 Mounted on a FR4 glass epoxy PCB(70mm70mm1.6mm). *5 The voltage difference between inverting input and non-inverting input is the differential input voltage. Then input terminal voltage is set to more than VEE. www.rohm.com TSZ02201-0RAR1G200140-1-2 2012 ROHM Co., Ltd. All rights reserved. 2/19 26.OCT.2012 Rev.001 TSZ2211115001