99W133A 5 Channel Drivers/Regulator for car Mini Disk BA5813FM Description Dimension (Units : mm) The BA5813FM is a 5-channel driver including a 4-channel BTL driver and a 1-channel reversible motor driver and regulator for car applications. Separating the Vcc into Pre and Pow can make the unit morepower efficient. Features 1) Wide dynamic range (4.0V typical at PreVcc=8V, PowVcc=5V) 2) The loading output voltage is adjustable by the HSOP-M28 voltage control terminal. 3) Variable regulator built-in 4) Thermal shut down circuit built-in 5) Small surface mount power package HSOP-M28 Applications MD Absolute Maximum Ratings (Ta=25C) Parameter Symbol Limits Unit Power supply voltage PREVcc, POWVcc 13.5 V * Power dissipation Pd 2.2 W Operating temperature range Topr 40 ~ +85 C Storage temperature range Tstg 55 ~ +150 C * Derating : 17.6mV/ C for operation above Ta=25C. On less than 3% (percentage occupied by copper foil), 70mm 70mm, t=1.6mm, glass epoxy mounting. January, 2000Guaranteed operating ranges (Ta=25C) Parameter Symbol Typ. Min. Max. Unit PREVcc 4.3 13.2 V Power supply voltage POWVcc 4.3 PREVcc V Electrical characteristics (Unless otherwise noted, Ta=25C, PREVcc=RVcc=8V, POWVcc1,2=5V, BIAS=1.65V, R L=8 ) Conditions Parameter Symbol Min. Typ. Max. Unit Quiescent current ICC 17 23 mA No load <BTL driver> Output offset voltage Voo 50 0 50 mV Maximum output voltage VOM 3.6 4.0 V Closed loop voltage gain (CH1) GVC1 16.2 18.0 19.8 dB Closed loop voltage gain (CH2) GVC2 22.7 24.5 26.3 dB Closed loop voltage gain (CH3, 4) GVC3 10.5 12.0 13.5 dB <Regulator> Threshold voltage of REG-P pin VREGPTH 1.14 1.20 1.26 V Output sink current of REG-B pin ISIN 10 mA Input bias current of REG-P pin IBOP 20 300 nA <Loading driver> Output saturation voltage 1 VSAT1 0.7 1.1 1.5 V I L=200mA (Upper + Lower) Output adjustable gain on 7.4 9.2 11.0 dB side output for GND GVH side voltage This product is not designed for protection against radioactive rays. Application circuit