Sound Processors for Home Theater Systems 5.1ch Sound Processors No.10081EAT04 BD3813KS,BD3815KS Description The BD3813KS and BD3815KS sound processors integrate a gain amp and volume/bass/treble controls on a single chip, making them optimally suited for use in audio applications, such as AV receivers, home theater systems and mini-component systems. Used in combination with the BD3812F, a 2ch volume IC, the units enable 6.1ch and 7.1ch operation. In addition, utilization of a BiCMOS process ensures a wide dynamic range (129dB). Features 1) Wide dynamic range: 129dB (Tone Bypass, VOL=MUTE, IHF-A) 2) Independent 6 channels for Master Volume (0 to -95 dB, MUTE 1dB/Step) Implementation of a resistance ladder type circuit reduces residual noise and shock sounds during switching. 3) Low current consumption achieved through utilization of BiCMOS processes 4) Maximum output voltage: 4.2Vrms (Vcc=7V, VEE=-7V, RL=10k) 5) Built-in 5ch independent input gain amplifier - useful for amplifying input signals 6) Built-in 2ch output port 7) 2-wire serial control (for both 3.3V and 5V) Applications AV receivers, home theater systems and mini-component systems Line up matrix Parameter BD3813KS BD3815KS Mode Selector Yes Yes Input Gain 0 6 12dB 0 6 18dB Volume 0 to -95dB 1dB/Step 0 to -95dB 1dB/Step Bass, Treble 14dB 2dB/Step 14dB 2dB/Step Number of Ports 2 2 Package SQFP56 SQFP56 www.rohm.com 2010.06 - Rev.A 1/17 2010 ROHM Co., Ltd. All rights reserved. Technical Note BD3813KS,BD3815KS Absolute maximum ratings (Ta=25) Parameter Symbol Ratings Unit *1 7.5 V CC Power Supply Voltage V -7.5 V EE V +0.3 to VEE-0.3 Input Signal Voltage V CC V IN *2 Power Dissipation Pd 1000 mW 20 to 75 Operating Temperature Range Topr C Storage Temperature Range Tastg 55 to 125 C *1 Applying voltage only to the V side, even if within the specified power supply voltage range, may cause excessive CC current to flow, resulting in permanent damage to the IC. Therefore, when starting up the power supplies, VEE and V CC should either be powered ON simultaneously, or VEE first, followed by V . CC *2 Please note the derating characteristics above Ta=25 : 10mW/ (Mounted on a 70mmx70mmx1.6mm sized board). Operating conditions (Normal function at Ta=25) Ratings Parameter Symbol Unit Min. Typ. Max. V 5 7 7.3 CC Operating Supply Voltage V V -7.3 -7 -5 EE www.rohm.com 2010.06 - Rev.A 2/17 2010 ROHM Co., Ltd. All rights reserved.