BD4275FPJ-CE2 ROHM

Datasheet LDO Regulators with Voltage Detector 500 mA Output LDO Regulator with Voltage Detector BD4275FP2-C BD4275FPJ-C General Description Key Specifications BD4275FP2-C and BD4275FPJ-C are automotive suited Qualified for Automotive Applications voltage regulator with 1ch Reset and offers the output Input Voltage Range: -0.3 V to +45 V current of 500mA while limiting the low quiescent current. Low Quiescent Current: 65 A (Typ) These regulators are therefore ideal for applications Output Load Current: 500 mA requiring a direct connection to the battery and a low Output Voltage: 5.0 V 2 % current consumption. A reset signal is generated for an Reset Detect Voltage : 4.50 V to 4.75 V output voltage VO of Typ 4.62 V. Over Current Protection (OCP) The reset delay time can be programmed by the external Thermal Shut Down (TSD) capacitor. Package W (Typ) D (Typ) H (Max) Features FP2: TO263-5F 10.16 mm 15.10 mm 4.70 mm (1) AEC-Q100 qualified. Low ESR ceramic capacitors applicable for output. Low drop voltage: PDMOS output transistor Power on and under-voltage reset Programmable reset delay time by external capacitor. (1): Grade 1 Applications Onboard vehicle device (body-control, car stereos, satellite navigation system, etc) FPJ: TO252-J5F 6.60 mm 10.10 mm 2.38 mm Figure 1. Package Outlook Typical Application Circuit VCC and VO pin capacitors: 0.1 F CIN (Typ), 6 F CO (Min) Please refer to theSelection of Components Externally Connecte. VCC VO VCC VO CIN CO R O CT RO GND Figure 2. Typical Application Circuit Product structureSilicon monolithic integrated circuit This product is not designed protection against radioactive rays www.rohm.com TSZ02201-0G1G0AN00410-1-2 2013 ROHM Co., Ltd. All rights reserved. 1/20 TSZ22111 14 001 20.May.2015 Rev.004Datasheet BD4275FP2-C BD4275FPJ-C Pin Configurations TO263-5F TO252-J5F (TOP VIEW) (TOP VIEW) FIN FIN 12 3 4 5 1 2 3 4 5 Figure 3. Pin configurations Pin Descriptions Pin No. Pin Name Function 1 VCC Supply Voltage Input 2 RO Reset Output Open-Collector output. 3 GND Ground Pin3 internally connected to FIN. 4 CT Reset Delay connect capacitor to GND for setting delay time. 5 VO 5 V Output FIN FIN FIN FIN internally connected to Pin3. Block Diagram Figure 4. Block Diagram www.rohm.com TSZ02201-0G1G0AN00410-1-2 2013 ROHM Co., Ltd. All rights reserved. 2/20 20.May.2015 Rev.004 TSZ22111 15 001