BD7411G-EVK-001 ROHM

Users Guide Hall IC BD7411G-EVK-001 Manual BD7411G-EVK-001 is an evaluation board for BD7411G, which is a ROHM Hall IC. This Users Guide is about how to use BD7411G-EVK-001 1 together with SensorShield* . *1 SensorShield is sold as Shield-EVK-001. Preparation Arduino Uno 1pc Personal Computer installed Arduino IDE 1pc Requirement : Arduino 1.6.7 or higher Please use Arduino IDE which can be downloaded from the link below: BD7411G-EVK-001 Manual Users Guide 7. Check log of Serial Monitor (Figure 6) Measurement BD7411G Magnet field Detect is displayed when the 1. Select Tools and check the contents enclosed in the red magnet is placed near the sensor board. frame. (Figure 3) Board should be Arduino/Genuino Uno and Port should be COMxx (Arduino/Genuino Uno). COM port number is different in each environment. Figure 6. Serial Monitor Figure 3. COM Port setting Board Information 2. Remove BD7411G-EVK-001 from the SensorShield 3. Write the program by pressing right arrow button for upload (Figure 4) 4. Wait for the message Done uploading (Figure 4) Figure 7. Picture of the board Figure 4. Uploading Table 1. Parts information 5. Connect BD7411G-EVK-001 to the SensorShield 6. Select Tools -> Serial Monitor (Figure 5) Figure 5. Tools Setting 2018 ROHM Co., Ltd. No. 60UG061E Rev.001 2/2 Apr.2018