Power Supply IC Series for TFT-LCD Panels High-precision Gamma Correction ICs with built-in DAC No.09035EBT02 BD8132FV, BD8139AEFV Description These gamma correction voltage generation ICs feature built-in DACs and provide a single-chip solution with setting control via serial communications, a high-precision 10-bit DAC, an output amp (18-channel or 10-channel), and Vcom. Features 1) Single-chip design means fewer components 2) Built-in 10 bit DAC (18ch: BD8132FV, 10ch: BD8139AEFV) 3) Built-in DAC output amp 4) Built-in Vcom amp 5) Built-in auto-read function 6) 3-line serial interface (BD8132FV) or 2-wire serial (BD8139AEFV) 7) Thermal shutdown circuit 8) SSOP-B40 package (BD8132FV) / HTSSOP-B40 package (BD8139AEFV) Applications These ICs can be used with TFT LCD panels used by large-screen and high-definition LCD TVs. Absolute maximum ratings (Ta = 25C) Parameter Symbol Limit Unit Power supply voltage 1 DVcc 7 V Power supply voltage 2 Vcc 20 V REFIN voltage REF 20 V Amp output current capacity Io 50*1 mA Junction temperature Tjmax 150 BD8132FV 1125*2 Power dissipation Pd mW BD8139AEFV 1600*3 Operating temperature range Topr -30 to +85 Storage temperature range Tstg -55 to +150 *1 Must not exceed Pd. *2 Reduced by 9.0 mW/C over 25C, when mounted on a glass epoxy board (70 mm 70 mm 1.6 mm). *3 Reduced by 12.8 mW/C over 25C, when mounted on a glass epoxy board (70 mm 70 mm 1.6 mm). Recommended Operating Ranges Limit Parameter Symbol Unit Min. Max. Power supply voltage 1 DVcc 2.3 4.0 V Power supply voltage 2 Vcc 6 18 V REFIN voltage REF 6 18 V Amp output current capacity Io 40 mA Serial clock frequency (BD8132FV) fCLK 5 MHZ 2 wire serial frequency (BD8139AEFV) fCLK 400 kHz OSC frequency (BD8132FV) fosc 10 200 kHz OSC frequency (BD8139AEFV) fosc 400 kHz www.rohm.com 2009.07 - Rev.B 1/20 2009 ROHM Co., Ltd. All rights reserved. Technical Note BD8132FV, BD8139AEFV Electrical Characteristics BD8132FV(Unless otherwise specified, Vcc = 15 V, DVcc = 3.3 V, Ta = 25) Limit Parameter Symbol Unit Condition Min. Typ. Max. REFIN Sinking current Iref 25 50 75 A REF = 10 V Gamma correction amp block Output current capacity Io 150 300 mA DAC = 3V, OUTx = 0 V Load stability V 5 20 mV Io = +10 mA to -10 mA, OUTx = 6 V Slew rate SR 3.5 V/S Ro = 100 k, Co = 100 pF * OUT max. output voltage VOH VCC-0.16 VCC-0.1 V Io = -5 mA OUT min. output voltage VOL 0.15 0.24 V Io = 5 mA Common amp block Input bias current Ib 0 1 A VFB = 6 V Output current capacity Io 150 300 mA DAC = 3V, OUTx = 0 V Load stability V 5 20 mV Io = +10 mA to -10 mA, OUTx = 3 V Slew rate SR 3.5 V/S Ro = 100 k, Co = 100 pF * Input voltage range VFB 0 VDAC V Ro = 100 k, Co = 100 pF * OUT max. output voltage VOH VCC-0.16 VCC-0.1 V Io = -5 mA OUT min. output voltage VOL 0.15 0.24 V Io = 5 mA DAC Resolution Res 10 Bit Nonlinearity error LE -2 2 LSB Ideal line error: 00A to 3F5 Differential linearity error DLE -2 2 LSB 1 LSB ideal increase error: 00A to 3F5 OSC Oscillating frequency fosc 80 kHz Internal frequency mode Control signals Sinking current Ictl 16 25 A Threshold voltage VTH 0.7 2.6 V DVCC = 3.3 V Reset time trst 45 s CCT = 1000 pF Overall Total supply current Icc 20 mA When all output voltages are set to 5 V. www.rohm.com 2009.07 - Rev.B 2/20 2009 ROHM Co., Ltd. All rights reserved.