DatasheeDatasheett Temperature Sensor ICs Low current Thermostat O utput BDJxxx1HFV Series General Description Key Specifications BDJxxx1HFV series is a thermostat output temperature Power Supply Voltage Range: 2.4V to 5.5V sensor IC with built-in temperature detection element, Supply Current: constant current circuit, and a high-accuracy reference Normal Function mode 7.5A (Typ) voltage source in one chip. Temperature detection can Power Down mode 0.3A (Typ) be realized at 2.5C accuracy without the need for a High Accuracy Thermostat: complicated design. It is the best suited for portable 2.5C (Max) Ta=60C to +90C equipment of micro- and low-current, power down Sensing Temperature Hysteresis: 10.0C (Typ) function, and battery drive. It is possible to use it for a High Accuracy Analog Output: wide range of applications such as heat detection and 2.5C (Max) Ta=-30C to +100C temperature monitors because it provides an analog Analog Output Temperature Sensitivity: output in addition to the thermostat power output. -8.2 mV/C (Typ) BDJxxx1HFV series has 6 products at 60C, 70C, Operating Temperature Range: -30C to +100C 75C, 80C, 85C and 90C detection temperature. Package W(Typ) x D(Typ) x H(Max) Features Detection Temperature lineup at 60C, 70C, 75C, 80C, 85C, 90C (6 products) Built-in power down control function. (Min PD interface Voltage is 1.5V) Low thermal resistance package (Typ 187C/W) ESD Rating of 8kV (HBM) OS Output Active H HVSOF5 Applications 1.60mm x 1.60mm x 0.60mm Cellular Phone, Digital Camera, Thermal Protection for Electrical Equipment (Notebook PC, FPD-TV, etc.) Typical Application Circuit Please adjust capacitor according to the noise condition of the set. Please adjust bypass TEMP VDD 1F Capacitor according to IREF the noise condition of the 1 5 set. GND C 0.1F VREF + - 2 TEMP Please pull-up of over 10k for OS PD SENSOR the OS output terminal. 4 3 PD C Product structureSilicon monolithic integrated circuit This product has no designed protection against radioactive rays . www.rohm.com TSZ02201-0M2M0F515120-1-2 2015 ROHM Co., Ltd. All rights reserved. 1/13 TSZ2211114001 06.Nov.2015 Rev.001 BDJxxx1HFV Series Block Diagram and Pin Configuration TOP VIEW IREF TEMP VDD 1 5 VREF GND 2 C TEMP C C SENSOR OS PD 4 3 PD C C C Pin Descriptions Pin No. Pin Name Function Comment Output voltage in inverse proportion to Set to Open state or connect to a high input 1 TEMP the Temperature impedance node (over 10M). 2 GND Ground Power Down Control H: Thermostat and Analog Output operation. 3 PD H: Normal Function mode L: Power Down state. L: Power Down mode Open-Drain Active-High. 4 OS Digital Thermostat Output Use pull-up resistor of more than 10k . 5 VDD Power Supply Voltage www.rohm.com TSZ02201-0M2M0F515120-1-2 2015 ROHM Co., Ltd. All rights reserved. 2/13 TSZ2211115001 06.Nov.2015 Rev.001