BH25NB1WHFV-TR ROHM

CMOS LDO Regulators for Portable Equipments 1ch 150mA CMOS LDO Regulators No.11020EBT04 BHNB1WHFV series Description The BHNB1WHFV series is a line of 150 mA output, high-performance CMOS regulators that deliver a high ripple rejection ratio of 80 dB (Typ., 1 kHz). They are ideal for use in high-performance, analog applications and offer improved line regulation, load regulation, and noise characteristics. Using the ultra-small HVSOF5 package, which features a built-in heat sink, contributes to space-saving application designs. Features 1) High accuracy output voltage: 1% 2) High ripple rejection ratio: 80 dB (Typ., 1 kHz) 3) Stable with ceramic capacitors 4) Low bias current: 60 A 5) Output voltage on/off control 6) Built-in overcurrent and thermal shutdown circuits 7) Ultra-small HVSOF5 power package Applications Battery-driven portable devices, etc. Product line 150 mA BHNB1WHFV Series Product name 2.5 2.8 2.85 2.9 3.0 3.1 3.3 Package BHNB1WHFV HVSOF5 Model name: BHNB1W a b Symbol Description Output voltage specification Output voltage (V) Output voltage (V) 25 2.5 V (Typ.) 30 3.0 V (Typ.) a 28 2.8 V (Typ.) 31 3.1 V (Typ.) 2J 2.85 V (Typ.) 33 3.3 V (Typ.) 29 2.9 V (Typ.) b Package HFV: HVSOF5 www.rohm.com 2011.01 - Rev.B 1/8 2011 ROHM Co., Ltd. All rights reserved. Technical Note BHNB1WHFV series Absolute maximum ratings Parameter Symbol Ratings Unit Applied power supply voltage VMAX 0.3 to +6.0 V *1 Power dissipation Pd 410 mW Operating temperature range Topr 40 to +85 C Storage temperature range Tstg 55 to +125 C *1: Reduce by 4.1 mW/C over 25C, when mounted on a glass epoxy PCB (70 mm 70 mm 1.6 mm). Recommended operating ranges (not to exceed Pd) Parameter Symbol Ratings Unit Power supply voltage VIN 2.5 to 5.5 V Output current IOUT 0 to 150 mA Recommended operating conditions Ratings Parameter Symbol Unit Conditions Min. Typ. Max. The use of ceramic *2 Input capacitor CIN 0.1 F capacitors is recommended. The use of ceramic *2 Output capacitor CO 2.2 F capacitors is recommended. *2 Make sure that the output capacitor value is not kept lower than this specified level across a variety of temperature, DC bias characteristic. And also make sure that the capacitor value cannot change as time progresses. Electrical characteristics (Unless otherwise specified, Ta = 25C, VIN = VOUT + 1.0 V, STBY = 1.5 V, CIN = 0.1 F, CO = 2.2 F) Limits Parameter Symbol Unit Conditions Min. Typ. Max. Output voltage VOUT VOUT0.99 VOUT VOUT1.01 V IOUT = 1 mA IOUT = 50 mA Circuit current IGND 60 100 A STBY = 0 V Circuit current (STBY) ISTBY 1.0 A VRR = 20 dBv, fRR = 1 kz, Ripple rejection ratio RR 80 dB IOUT = 10 mA IOUT = 1 mA to 30 mA Load response 1 LTV1 25 mV IOUT = 30 mA to 1 mA Load response 2 LTV2 25 mV VIN = 0.98 VOUT, Dropout voltage 1 VSAT1 80 150 mV IOUT = 30 mA VIN = 0.98 VOUT, Dropout voltage 2 VSAT2 250 450 mV IOUT = 100 mA VIN = VOUT + 0.5 V to 5.5 V, Line regulation VDL1 1 20 mV IOUT = 50 mA IOUT = 1 mA to 100 mA Load regulation 1 VDLO1 6 30 mV IOUT = 1 mA to 150 mA Load regulation 2 VDLO2 9 90 mV Overcurrent protection ILMAX 250 mA VO = VOUT 0.98 limit current Short current ISHORT 50 mA VO = 0 V STBY pull-down resistance RSTB 275 550 1100 k ON VSTBH 1.5 VIN V STBY control voltage OFF VSTBL 0.3 0.3 V * This IC is not designed to be radiation-resistant. www.rohm.com 2011.01 - Rev.B 2/8 2011 ROHM Co., Ltd. All rights reserved.